Lexmark S500, 30E Ping The Access Point To Make Sure The Network Is Working, For Windows users

CHECK YOUR WEP KEY OR WPA PASSPHRASE

A WEP key or WPA passphrase is like a password. All devices on a WEP-secured wireless network must share the same WEP key, and all devices on a WPA-secured wireless network must share the same WPA passphrase.

Note: Make sure you copy it exactly, including any capital letters, and store it in a safe place for future reference.

If you are using WEP security

A valid WEP key is:

•Exactly 10 or 26 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9. or

•Exactly 5 or 13 ASCII characters. ASCII characters are letters, numbers, and symbols found on a keyboard.

If you are using WPA security

A valid WPA passphrase is:

•From 8 to 63 ASCII characters. ASCII characters in a WPA passphrase are case-sensitive. or

•Exactly 64 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9.

If your wireless network is not using security, then you will not have a security key. Using a wireless network with no security is not recommended because it can allow intruders to use your network resources without your consent.

CHECK MAC ADDRESS

If your network uses MAC address filtering, make sure that you include the MAC address of the printer in the MAC address filter list. This will allow the printer to operate on the network. For more information, see “How do I find the MAC address?” on page 85.

PING THE ACCESS POINT TO MAKE SURE THE NETWORK IS WORKING

For Windows users

1If you do not already know it, find the IP address of the access point: a Click , or click Start and then click Run.

b In the Start Search or Run box, type cmd.

cPress Enter, or click OK.

The Command Prompt window opens.

dType ipconfig, and then press Enter.

•The “Default Gateway” entry is typically the wireless access point.

•The IP address appears as four sets of numbers separated by periods, such as 192.168.2.134.

2Ping the access point:

aClick , or click Start and then click Run.

bIn the Start Search or Run box, type cmd.

cPress Enter, or click OK.

The Command Prompt window opens.

Troubleshooting

114