Lexmark 30E, S500, 301 manual Saving paper default settings

Load up to:

10iron-on transfers

50transparencies

Make sure that:

•You follow the loading instructions on the iron-on transfer packaging.

•The print side of the transfer is faceup.

•The paper guides rest against the edges of the transfer.

•You select Automatic, Normal, or Photo print quality.

•The rough side of the transparencies is faceup.

•The paper guides rest against the edges of the transparencies.

Saving paper default settings

You can set the default paper size, paper type, and photo print size for the documents and photos that you print.

Note: These default settings apply only to print, copy, and scan jobs that you initiate from the printer.

1From the printer control panel, press .

2Choose the default settings:

•If you want to set the default paper size: a Press to select Paper Setup.

bPress the up or down arrow button to scroll to Paper Size, and then press .

cPress the up or down arrow button to select the default paper size for the printer, and then press .

•If you want to set the default paper type:

aPress to select Paper Setup.

bPress the up or down arrow button to scroll to Paper Type, and then press .

cPress the up or down arrow button to select the default paper type for the printer, and then press .

•If you want to set the default photo print size:

aPress the up or down arrow button to scroll to Defaults, and then press .

bPress to select Photo Print Size.

cPress the up or down arrow button to select the default photo print size for the printer, and then press .

3Press until you exit Setup, or press another mode button.

Loading paper and original documents

28