Lexmark S500, 30E, 301 manual Adjusting copy quality, Making a copy lighter or darker

Notes:

•If you select Custom %, then press , and then press the left or right arrow button to select the desired custom percent value. Press to save the setting.

•If you select Borderless, then the printer will reduce or enlarge the document or photo as necessary to print a borderless copy on the paper size that you selected. For best results with this resize setting, use photo paper and set the paper type to Photo, or let the printer automatically detect the paper type.

6Press .

Note: After the copy job is finished, press to reset the settings to the default. The resize setting also switches to 100% after two minutes of printer inactivity.

Adjusting copy quality

1Load paper.

2Load an original document faceup into the ADF or facedown on the scanner glass.

3From the printer control panel, press .

4Press the up or down arrow button to scroll to Quality.

5Press the left or right arrow button to set the copy quality to Automatic, Draft, Normal, or Photo.

6Press .

Making a copy lighter or darker

1Load paper.

2Load an original document faceup into the ADF or facedown on the scanner glass.

3From the printer control panel, press .

4Press the up or down arrow button to scroll to Lighter/Darker.

5Press the left or right arrow button to adjust the slider.

Note: Pressing the left arrow button makes the copy lighter, and pressing the right arrow button makes the copy darker.

6Press .

Collating copies using the printer control panel

If you print multiple copies of a document, then you can choose to print each copy as a set (collated) or to print the copies as groups of pages (not collated).

Collated Not collated

Copying

54