Lexmark 301 Scanning to a flash drive or memory card, Scanning photos into an editing application

Notes:

•If the printer is connected only to a local computer, then the printer will automatically download a list of the scan applications.

•You may be prompted to enter a PIN if the computer requires it. Press the arrow buttons to enter the PIN. Press each time you enter a number.

•To assign a computer name and a PIN to the computer, see the Help for the printer software associated with your operating system.

4Wait until the printer has finished downloading a list of the scan applications available on the selected computer.

5Press the left or right arrow button to select an application, and then press .

6Press the arrow buttons to select the resolution quality and the original image size. Press each time you make a selection.

7Press to start scanning.

The scan is complete when the application you selected in step 5 opens on the destination computer, and the scan appears within the application as a new file.

Scanning to a flash drive or memory card

Before you begin, make sure your flash drive or memory card is not write protected.

1Load an original document faceup into the ADF or facedown on the scanner glass.

2From the printer control panel, press .

3Press the up or down arrow button to scroll to Memory Device.

4Insert the flash drive or memory card, and then press .

5Press the arrow buttons to select the resolution quality, the output file type you want to create, and the original image size. Press each time you make a selection.

Note: Select the PDF file type if you want to scan multiple pages and save them as one file.

6Press to start scanning.

The scan is complete when a message appears on the printer control panel indicating that the file you scanned has been saved.

Scanning photos into an editing application

Using the printer control panel

1Load the photo or photos facedown on the scanner glass.

2From the printer control panel, press .

3Press the left or right arrow button to scroll to USB or the name of the network computer to receive the scan, and then press .

The local or network computer is the destination that will receive the scan.

Scanning

59