Lexmark 301, S500, 30E manual Incorrect language appears on the display, Printhead errors

•“Print job does not print or is missing pages” on page 94

•“Printer is printing blank pages” on page 95

•“Printer is busy or does not respond” on page 95

•“Cannot delete documents from the print queue” on page 96

•“Cannot print through USB” on page 96

Incorrect language appears on the display

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

CHANGE THE LANGUAGE USING THE PRINTER MENUS

1From the printer control panel, press .

2Press the arrow buttons to scroll to Defaults, and then press .

3 Press the arrow buttons to scroll to Set Defaults, and then press .

4Press the arrow buttons to scroll to Use Factory, and then press .

5Complete the initial printer setup.

CHANGE THE LANGUAGE USING A BUTTON COMBINATION (IF YOU CANNOT READ THE CURRENT LANGUAGE)

1Turn the printer off.

Note: If you have set the Power Saver timeout in the Setup menu, then press and hold for three seconds to turn off the printer.

2Press and hold down and , and then press and release to turn the printer on.

Note: Do not release and until Language appears on the display, indicating that the printer has been reset.

3Complete the initial printer setup.

Printhead errors

If the "Before you troubleshoot" checklist does not solve the problem, then try the following:

Troubleshooting

92