Cisco Systems CISCO1841-HSEC/K9-RF manual Powering up the Cisco 1861 Integrated Services Router

Page 71

Chapter 7 Power-Up Procedures for Cisco 1800 Series Routers (Modular)

Powering up the Cisco 1861 Integrated Services Router

•Feature documentation

•Troubleshooting and maintenance

•Cisco 1800 series cards and modules

Powering up the Cisco 1861 Integrated Services Router

To power up the Cisco 1861 Integrated Services Router, perform the following steps:

Step 1 Verify that the AC power cord is connected to the power supply.

Step 2 Power up the power supply and the Cisco 1861 ISR, by connecting the power cord plug to a grounded AC outlet.

Note There is no external Power On/Off switch on the power supply.

Step 3 Verify the LED indicators on the front panel of the Cisco 1861 Integrated Services Router, as required. See Figure 7-1.

Software Components of the Cisco 1861 Integrated Services Router

The Cisco 1861 Integrated Services Router is shipped with a factory-installed software configuration for a basic IP telephony system that enables phone users to make and receive calls using the preconfigured numbers on their IP phones within minutes after connecting the Cisco 1861 Integrated Services Router to the Ethernet and their IP phones to the platform. Table 7-2summarizes the software components of the Cisco 1861 Integrated Services Router.

Table 7-2

Cisco 1861 Integrated Services Router Software Components

 

 

 

Software Component

Description

Benefits

 

 

 

 

Cisco Unified

 

Entry-level call processing

All files and configurations for IP phones are

Communications

system that provides a

stored internally on the Cisco 1861 Integrated

Manager Express

wide range of IP telephony

Services Router for a cost-effective, highly

(Cisco Unified CME)

features for small to

reliable, IP communications solution.

 

 

medium-sized business

 

 

 

customers and

 

 

 

autonomous small

 

 

 

enterprise branch offices.

 

 

 

 

Cisco Unity Express

Provides voice mail and

Users can easily and conveniently manage their

 

 

automated attendant

voice messages and greetings with intuitive

 

 

services specifically

telephone prompts and a straightforward

 

 

designed for the small and

web-based GUI that allows simple administration

 

 

medium-sized branch

 

 

 

office environment.

 

 

 

 

 

Cisco 1800 Series Routers (Modular) Hardware Installation Guide

 

OL-5876-03

7-7

 

 

 

Page 70 Page 72
Image 71
Page 70 Page 72
Contents Text Part Number OL-5876-03 Americas HeadquartersCopyright 2005-2008 Cisco Systems, Inc. All rights reserved Interfaces on the Cisco 1861 Integrated Services Router Site Log LED Indicators Modular Objectives Title Description AudienceOrganization Convention Description Safety WarningsConventions Bewaar Deze Instructies Aviso Instruções Importantes DE Segurança Warnung Wichtige SicherheitshinweiseAvvertenza Importanti Istruzioni Sulla Sicurezza Spara Dessa Anvisningar GEM Disse Anvisninger OL-5876-03 Related Documentation Duration of Hardware Warranty Cisco One-Year Limited Hardware Warranty TermsSearching for Cisco Documents Replacement, Repair, or Refund Policy for HardwareTo Receive a Return Materials Authorization RMA Number OL-5876-03 Overview of Cisco 1800 Series Routers Modular Product Serial Number Location, Hardware FeaturesCisco Product Identification Tool Product Serial Number LocationInterfaces Description Label Interfaces on the Cisco 1861 Integrated Services RouterInterfaces on the Cisco 1841 Router Model CompactFlash Memory Interface Cards AIMs Removable and Interchangeable ModulesMemory Color Description Location LED IndicatorsDescription Specification Real-Time Clock Chassis VentilationChassis Security Chassis ViewsExample Interface NumberingSlot Number Slot Type Interface Numbering on the 1861 Integrated Services Router Regulatory Compliance SpecificationsOL-5876-03 Safety Recommendations Safety with Electricity Preventing Electrostatic Discharge Damage Power Supply ConsiderationsGeneral Site Requirements Site Environment Installation ChecklistSite Configuration Task Verified by Date Site LogItems in the Box for the Cisco 1841 Router Inspecting the RouterAssembly hardware screws OL-5876-03 Plug-In Components Internal ComponentsInterfaces on the Cisco 1861 Integrated Services Router Setting the Chassis on a Desktop Setting Up the Chassis1shows the brackets Attaching Rack-Mount BracketsMounting the Chassis in a Rack Typical Installing the Router in a RackWall-Mounting the Cisco 1841 Router Wall-Mounting the ChassisChassis Grounding Wall Router Mounting screws Wall-Mounting the Cisco 1861 Integrated Services Router Wall-Mount Bracket for Power Supply Rack-Mounting the Cisco 1861 Integrated Services RouterBrackets for Rack-Mounting Power Supply Installing the Chassis Ground Connection 11 Chassis Ground Connection on the Cisco 1841 Router 12 Attaching the Ground Wire to the Chassis OL-5876-03 Console Port Connections Console and Auxiliary Port ConsiderationsEthernet Connections Preparing to Connect to a NetworkAuxiliary Port Connections Serial DTE or DCE Devices Configuring Serial ConnectionsSignaling Standards Supported Serial ConnectionsDistance for Distance LimitationsAsynchronous/Synchronous Serial Module Baud Rates Low-Capacitance Cable Isdn BRI ConnectionsCSU/DSU Connections OL-5876-03 Series Routers Modular Power ConnectionsPort Type, Color Connected to Cable Connecting WAN and LAN CablesPorts and Cabling Connection Procedures and Precautions Connecting to a Console Terminal or ModemConnecting to the Auxiliary Port Connecting to the Console PortConnecting a Modem to the Router OL-5876-03 Routers Modular Powering Up Cisco 1800 Series RoutersPower-Up Procedure Checklist for Power UpYourname con0 is now available Press Return to get started Color Status Verifying the LED Indicators on the 1841 RouterInitial Configuration Verifying the Hardware ConfigurationInitial Configuration of the Router Cisco Router and Security Device Manager Verifying the Initial ConfigurationCompleting the Configuration Description Benefits Powering up the Cisco 1861 Integrated Services RouterDescription Benefits Problem Solving Troubleshooting Cisco 1800 Series Routers ModularNormal Indications Troubleshooting the Power and Cooling SystemsFault Indications Environmental Reporting Features Troubleshooting Cables, Connections, and Interface CardsReading LEDs FDX System MessagesExplanantion Recovering a Lost PasswordMore Troubleshooting Help Related Product Documentation Cisco Interface Cards Installation GuideInstalling WICs, VWICs, and HWICs Card guides Interface card Page OL-5876-03 10-1 Replacing CompactFlash Memory Cards10-2 Using the Compact Flash GuardInstalling a CompactFlash Memory Card Removing a CompactFlash Memory Card10-3 10-4 11-1 11-2 Modules Internal to the Cisco 1841 RouterOpening the Chassis Removing the Chassis Screw 11-311-4 Locating Modules11-5 Installing a Sodimm11-6 Installing an AIM11-7 Accessory Kit to UseInstallation Procedure Cisco Part Number TypeLocation of Metal Standoff Attachment Locations 11-8Plastic Standoff Orientation 11-911-10 Connecting the AIM to the System Board11-11 Closing the ChassisApplying the AIM Label 11 Closing the Chassis 11-12IN-1 ACT LEDIN-2

CISCO1841-HSEC/K9-RF specifications

The Cisco Systems CISCO1841-HSEC/K9-RF is a versatile and robust router designed to meet the demands of small to medium-sized businesses and branch offices. This model is part of the Cisco 1800 Series Integrated Services Routers, which are known for their performance, security features, and scalability, making them ideal for organizations seeking to enhance their network infrastructure.

One of the main features of the CISCO1841-HSEC/K9 is its modular architecture. This design allows businesses to customize and expand their networks according to changing needs by adding various modules and interfaces. The router supports multiple WAN interfaces, which include serial, Ethernet, and DSL, providing flexible connectivity options to accommodate various networking scenarios.

The CISCO1841-HSEC/K9 also boasts an integrated security architecture. This router is equipped with advanced security features, including firewall capabilities, VPN support, and intrusion prevention systems. These technologies ensure that data is protected while being transmitted across the network. The built-in security features help organizations safeguard sensitive information against potential threats and cyberattacks.

In terms of performance, the CISCO1841-HSEC/K9 is powered by a high-speed processor and dynamic routing capabilities, which allow it to efficiently handle high volumes of traffic without compromising performance. The router supports various routing protocols, including EIGRP, OSPF, and BGP, facilitating seamless data flow and efficient route management.

Another noteworthy characteristic of the CISCO1841-HSEC/K9 is its support for voice and video services. This capability enables businesses to deploy unified communications applications, such as VoIP and video conferencing, enhancing collaboration among team members and improving overall productivity.

Moreover, the router is designed for easy management and monitoring. Cisco’s IOS software provides a user-friendly interface, allowing network administrators to configure, operate, and troubleshoot the network with ease. The router also supports Cisco’s Smart Install feature for simplified deployment and management.

In summary, the Cisco Systems CISCO1841-HSEC/K9-RF is a powerful and adaptable router that combines security, flexibility, and performance. Its modular design, robust security features, support for various routing protocols, and capabilities for multimedia applications make it a compelling choice for businesses looking to enhance their network infrastructure while addressing current and future demands.
Top Page Image Contents