Cisco Systems CISCO1841-HSEC/K9-RF manual Using the Compact Flash Guard, 10-2

Page 84

Chapter 10 Installing and Replacing CompactFlash Memory Cards on Cisco 1800 Series Routers (Modular)

Removing a CompactFlash Memory Card

To remove a CompactFlash memory card from an external slot, follow these steps:

Caution If the CF LED is on or blinking, do not remove the CompactFlash memory card. The router could crash, or the flash memory contents could be corrupted.

Step 1 Press the ejector button next to the CompactFlash memory card. The ejector button moves outward so that it projects from the panel.

Step 2 Press the ejector button again to unseat the card.

Step 3 Carefully pull the card out of the slot.

Step 4 Place the removed CompactFlash memory card on an antistatic surface or in a static shielding bag. Step 5 Push the ejector button in until it clicks.

Caution To prevent damage to the ejector mechanism, the ejector button must remain fully seated when not being used to eject a CompactFlash memory card.

Installing a CompactFlash Memory Card

To install a CompactFlash memory card, follow these steps:

Step 1 Make sure that the ejector button is fully seated so that it does not project from the panel.

Note If the ejector button projects from the panel, push it in until it clicks.

Step 2 With the label facing up, insert the connector end of the CompactFlash memory card into the slot until

the card is seated in the connector. The card is keyed so that it cannot be inserted incorrectly.

Note If the ejector button projects from the panel after you insert the CompactFlash memory card, remove the card, press the ejector button until it clicks, and reinsert the card.

Caution To prevent damage to the ejector mechanism, the ejector button must remain fully seated when not being used to eject a CompactFlash memory card.

Using the Compact Flash Guard

The Compact Flash guard (CF-guard) provides protection for the compact flash memory slot.

Cisco 1800 Series Routers (Modular) Hardware Installation Guide

10-2

OL-5876-03

 

 

Page 83 Page 85
Image 84
Page 83 Page 85
Contents Americas Headquarters Text Part Number OL-5876-03Copyright 2005-2008 Cisco Systems, Inc. All rights reserved Interfaces on the Cisco 1861 Integrated Services Router Site Log LED Indicators Modular Objectives Audience OrganizationTitle Description Safety Warnings ConventionsConvention Description Bewaar Deze Instructies Warnung Wichtige Sicherheitshinweise Avvertenza Importanti Istruzioni Sulla SicurezzaAviso Instruções Importantes DE Segurança Spara Dessa Anvisningar GEM Disse Anvisninger OL-5876-03 Related Documentation Cisco One-Year Limited Hardware Warranty Terms Duration of Hardware WarrantyReplacement, Repair, or Refund Policy for Hardware To Receive a Return Materials Authorization RMA NumberSearching for Cisco Documents OL-5876-03 Overview of Cisco 1800 Series Routers Modular Hardware Features Product Serial Number Location,Product Serial Number Location InterfacesCisco Product Identification Tool Interfaces on the Cisco 1861 Integrated Services Router Interfaces on the Cisco 1841 RouterDescription Label Removable and Interchangeable Modules MemoryModel CompactFlash Memory Interface Cards AIMs LED Indicators Description SpecificationColor Description Location Chassis Ventilation Real-Time ClockChassis Views Chassis SecurityInterface Numbering Slot Number Slot TypeExample Interface Numbering on the 1861 Integrated Services Router Specifications Regulatory ComplianceOL-5876-03 Safety Recommendations Safety with Electricity Power Supply Considerations General Site RequirementsPreventing Electrostatic Discharge Damage Installation Checklist Site ConfigurationSite Environment Site Log Task Verified by DateInspecting the Router Items in the Box for the Cisco 1841 RouterAssembly hardware screws OL-5876-03 Internal Components Plug-In ComponentsInterfaces on the Cisco 1861 Integrated Services Router Setting Up the Chassis Setting the Chassis on a DesktopAttaching Rack-Mount Brackets 1shows the bracketsInstalling the Router in a Rack Mounting the Chassis in a Rack TypicalWall-Mounting the Chassis Chassis GroundingWall-Mounting the Cisco 1841 Router Wall Router Mounting screws Wall-Mounting the Cisco 1861 Integrated Services Router Rack-Mounting the Cisco 1861 Integrated Services Router Wall-Mount Bracket for Power SupplyBrackets for Rack-Mounting Power Supply Installing the Chassis Ground Connection 11 Chassis Ground Connection on the Cisco 1841 Router 12 Attaching the Ground Wire to the Chassis OL-5876-03 Console and Auxiliary Port Considerations Console Port ConnectionsPreparing to Connect to a Network Auxiliary Port ConnectionsEthernet Connections Configuring Serial Connections Signaling Standards SupportedSerial Connections Serial DTE or DCE DevicesDistance Limitations Asynchronous/Synchronous Serial Module Baud RatesDistance for Isdn BRI Connections CSU/DSU ConnectionsLow-Capacitance Cable OL-5876-03 Power Connections Series Routers ModularConnecting WAN and LAN Cables Ports and CablingPort Type, Color Connected to Cable Connecting to a Console Terminal or Modem Connection Procedures and PrecautionsConnecting to the Console Port Connecting to the Auxiliary PortConnecting a Modem to the Router OL-5876-03 Powering Up Cisco 1800 Series Routers Routers ModularChecklist for Power Up Power-Up ProcedureYourname con0 is now available Press Return to get started Verifying the LED Indicators on the 1841 Router Color StatusVerifying the Hardware Configuration Initial Configuration of the RouterInitial Configuration Verifying the Initial Configuration Completing the ConfigurationCisco Router and Security Device Manager Powering up the Cisco 1861 Integrated Services Router Description BenefitsDescription Benefits Troubleshooting Cisco 1800 Series Routers Modular Problem SolvingTroubleshooting the Power and Cooling Systems Fault IndicationsNormal Indications Troubleshooting Cables, Connections, and Interface Cards Environmental Reporting FeaturesReading LEDs System Messages FDXRecovering a Lost Password More Troubleshooting HelpExplanantion Cisco Interface Cards Installation Guide Installing WICs, VWICs, and HWICsRelated Product Documentation Card guides Interface card Page OL-5876-03 Replacing CompactFlash Memory Cards 10-1Using the Compact Flash Guard Installing a CompactFlash Memory CardRemoving a CompactFlash Memory Card 10-210-3 10-4 11-1 Modules Internal to the Cisco 1841 Router Opening the Chassis11-2 11-3 Removing the Chassis ScrewLocating Modules 11-4Installing a Sodimm 11-5Installing an AIM 11-6Accessory Kit to Use Installation ProcedureCisco Part Number Type 11-711-8 Location of Metal Standoff Attachment Locations11-9 Plastic Standoff OrientationConnecting the AIM to the System Board 11-10Closing the Chassis Applying the AIM Label11-11 11-12 11 Closing the ChassisACT LED IN-1IN-2

CISCO1841-HSEC/K9-RF specifications

The Cisco Systems CISCO1841-HSEC/K9-RF is a versatile and robust router designed to meet the demands of small to medium-sized businesses and branch offices. This model is part of the Cisco 1800 Series Integrated Services Routers, which are known for their performance, security features, and scalability, making them ideal for organizations seeking to enhance their network infrastructure.

One of the main features of the CISCO1841-HSEC/K9 is its modular architecture. This design allows businesses to customize and expand their networks according to changing needs by adding various modules and interfaces. The router supports multiple WAN interfaces, which include serial, Ethernet, and DSL, providing flexible connectivity options to accommodate various networking scenarios.

The CISCO1841-HSEC/K9 also boasts an integrated security architecture. This router is equipped with advanced security features, including firewall capabilities, VPN support, and intrusion prevention systems. These technologies ensure that data is protected while being transmitted across the network. The built-in security features help organizations safeguard sensitive information against potential threats and cyberattacks.

In terms of performance, the CISCO1841-HSEC/K9 is powered by a high-speed processor and dynamic routing capabilities, which allow it to efficiently handle high volumes of traffic without compromising performance. The router supports various routing protocols, including EIGRP, OSPF, and BGP, facilitating seamless data flow and efficient route management.

Another noteworthy characteristic of the CISCO1841-HSEC/K9 is its support for voice and video services. This capability enables businesses to deploy unified communications applications, such as VoIP and video conferencing, enhancing collaboration among team members and improving overall productivity.

Moreover, the router is designed for easy management and monitoring. Cisco’s IOS software provides a user-friendly interface, allowing network administrators to configure, operate, and troubleshoot the network with ease. The router also supports Cisco’s Smart Install feature for simplified deployment and management.

In summary, the Cisco Systems CISCO1841-HSEC/K9-RF is a powerful and adaptable router that combines security, flexibility, and performance. Its modular design, robust security features, support for various routing protocols, and capabilities for multimedia applications make it a compelling choice for businesses looking to enhance their network infrastructure while addressing current and future demands.
Top Page Image Contents