Cisco Systems PI21AG, CB21AG manual Mounting the Antenna, Inserting the Antenna into Its Base

Chapter 1 Product Overview and Installation

Inserting the Client Adapter

Figure 1-6 Inserting the Antenna into Its Base

2

1

2

3

1

3

95584

Antenna

Notch

Antenna base

Step 3 Press the antenna cable into the receptacle on the top of the base as shown in Figure 1-6.

Step 4 Press the antenna straight down into the receptacle until it clicks into place.

Mounting the Antenna

Because the PCI card is a radio device, it is susceptible to RF obstructions and common sources of interference that can reduce throughput and range. Follow these guidelines to ensure the best possible performance:

•Place the PCI card’s antenna in an area where large steel structures such as shelving units, bookcases, and filing cabinets will not obstruct radio signals being transmitted or received.

•Place the antenna away from microwave ovens and 2.4- and 5.8-GHz cordless phones. These products can cause signal interference because they operate in the same frequency range as the PCI card.

	Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
1-14	OL-16534-01