Cisco Systems CB21AG, PI21AG manual Unpacking the Client Adapter

Page 7

Chapter 1 Product Overview and Installation

Unpacking the Client Adapter

Use in specific environments:

The use of wireless devices in hazardous locations is limited to the constraints posed by the safety directors of such environments.

The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA).

The use of wireless devices in hospitals is restricted to the limits set forth by each hospital.

Warnings

Observe the following warnings when operating the client adapter. The second warning pertains to the PI21AG client adapter, and the third warning pertains to the CB21AG client adapter.

Warning Do not operate your wireless network device near unshielded blasting caps or in an explosive environment unless the device has been modified to be especially qualified for such use.

Warning In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a minimum of 7.9 inches (20 cm) or more from the body of all persons.

Warning This device has been tested and complies with FCC RF Exposure (SAR) limits in typical laptop computer configurations and this device can be used in desktop or laptop computers with side mounted PC Card slots that can provide at least 0.394 in (1 cm) separation distance from the antenna to the body of the user or a nearby person. Thin laptop computers may need special attention to maintain antenna spacing while operating. This device cannot be used with handheld PDAs (personal digital assistants). Use in other configurations may not ensure compliance with FCC RF exposure guidelines. This device and its antenna must not be co-located or operated in conjunction with any other antenna or transmitter.

Translated versions of these safety warnings are provided in Appendix B

Unpacking the Client Adapter

Follow these steps to unpack the client adapter:

Step 1 Open the shipping container and carefully remove the contents.

Step 2 Return all packing materials to the shipping container and save the container.

Step 3 Ensure that all items listed in the “Package Contents” section below are included in the shipment. Check each item for damage.

Note If any item is damaged or missing, notify your authorized Cisco sales representative.

Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista

 

OL-16534-01

1-7

 

 

 

Image 7
Contents Product Overview and Installation Terminology Introduction to the Client AdaptersLEDs Hardware ComponentsRadio Radio Antenna Ad Hoc Wireless LAN Network Configurations Using Client Adapters Software Components Ad Hoc Wireless LAN FCC Safety Compliance Statement Safety informationSafety Guidelines Unpacking the Client Adapter System Requirements Package ContentsFor Infrastructure Devices Site RequirementsFor Client Devices Inserting a PC-Cardbus Card Inserting the Client AdapterChanging the Bracket Inserting a PCI CardInserting the Card Inserting a PCI Card into a PC Assembling the AntennaInserting the Antenna into Its Base Mounting the AntennaBottom of Antenna Base Mounting the Antenna Obtaining Client Adapter Software Installing the Client Adapter Driver and Software 11 Cisco Aironet Installation Program Window 13 Cisco Aironet Installation Program-Setup Status Window Click Finish OL-16534-01
Related manuals
Manual 34 pages 15 Kb Manual 286 pages 35.03 Kb Manual 170 pages 950 b Manual 22 pages 55.14 Kb