Cisco Systems 971M quick start Front Panel

Prestige 971M Quick Start Guide

1.2 Front Panel

Look at the front panel LEDs. The SYS LED blinks while performing system testing. The SYS LED then turns steady on if the testing was successful. The CABLE LED blinks and turns steady on if the RF-Connectorport is properly connected. The LAN LED turns on if the (corresponding) LAN port is properly connected.

Table 1 Front Panel LEDs

LED	COLOR	STATUS	DESCRIPTION
PWR	Green	On	The power is on.
		Off	The power is off.
SYS	Green	On	The Prestige is receiving power and functioning properly.
		Blinking	The Prestige is rebooting.
	None	Off	The system is not ready or has malfunctioned.
LAN	Green	On	The LAN Ethernet Port has a successful link.
		Blinking	The LAN Port is Sending or Receiving Ethernet data.
	None	Off	The LAN Ethernet Port is not ready or cannot achieve a link.
USB	Green	On	The USB-Computer Link is successful.
		Blinking	The P-971M is Sending or Receiving USB data.
	None	Off	The USB-Computer Link is not ready or unsuccessful.
DATA	Green	Blinking	The Cable Interface (WAN Port), is Transmitting/Receiving.
	None	Off	The WAN connection is idle.

4