Philips AQ 6688 manual General Features, Reset button, Locking, Clock Display

GENERAL FEATURES SETTING THE CLOCK

Reset button

Should you receive external interference e.g. static electricity from carpets, thunderstorms, etc. which affects the display and electronic functions of your set, the reset button allows you to clear all data (e.g. tuning step, presets) from your set and to start up again.

•Use a ball point pen to press the RESET button, found on the back of the cassette door.

Locking

This button helps you to prevent any of the other front panel controls from being accidentally pressed when you are listening to the radio or when you are not using the radio.

1Press the LOCK button

ª appears in the display when LOCK is activated.

2To deactivate the LOCK function, press LOCK again.

ª disappears from the display.

CLOCK DISPLAY

The time is displayed using either the 12 or 24-hour clock system. The seconds are synchronized with the flashing colon ‘:’ second by second, and also by the 12-segment analogue

clock display, where each segment represents 5 seconds.

1In the time mode, press ENTER.

ªThe clock digits will flash for 5 seconds.

2To set the hour/ minutes for the clock time, press HR or MIN while the display is still flashing.

ªWith your finger held down on HR , the hour will increase steadily as a number from 1-12 or 0-23. Release HR when you reach the approximate time setting.

ªWith your finger held down on MIN, the minutes will increase rapidly and continuously. Press briefly and repeatedly if you need to adjust the minutes slowly.

3Press the ENTER button a second time to confirm the time setting.

ªThe clock digits will stop flashing.

English

5