Cisco Systems 7505 quick start Configure an Ethernet Interface

Page 14

Start and Configure the System

12

Configure an Ethernet Interface

Step 1 To configure your system for an Ethernet LAN, respond to the prompts as follows, using your own IP address and subnet mask information:

Configuring interface parameters:

Configuring interface Ethernet0/0: Is this interface in use? [no]: yes Configure IP on this interface? [no]: yes IP address for this interface: 1.1.1.10 Number of bits in subnet field [0]:

Class A network is 1.0.0.0, 0 subnet bits; mask is 255.0.0.0

Step 2 Enter yes to enable IPX on this interface,

using the IPX network number:

Configure IPX on this interface? [no]: yes IPX network number [2]:

Step 3 Enter yes to enable AppleTalk on this interface, to configure for extended AppleTalk networks, and then enter the cable range number. Enter the zone name and any other additional zones that will be associated with your local zone:

Configure AppleTalk on this interface? [no]:

yes

Extended AppleTalk network? [no]: yes AppleTalk starting cable range [0]:

Configure a Synchronous Serial Interface

Step 1 Enter yes to configure serial port 0:

Configuring interface Serial1/0: Is this interface in use? [no]: yes

Step 2 Determine which protocols you want to allow on the synchronous serial interface and enter the appropriate responses:

Configure IP unnumbered on this interface? [no]:

IP address for this interface: 1.1.1.20 Number of bits in subnet field [0]:

Class A network is 1.0.0.0, 0 subnet bits; mask is 255.0.0.0

Configure IPX on this interface? [no]: yes IPX network number [2]:

Configure AppleTalk on this interface? [no]:

yes

Extended AppleTalk network? [no]:

AppleTalk network number [1]:

Step 3 Press Ctrl-Zto exit configuration mode.

Step 4 At the # prompt, enter the copy

running-config startup-config command

to save the configuration to NVRAM as

follows:

Hostname# copy running-config startup-config

Step 4 At the # prompt, enter the copy

running-config startup-config command

to save the configuration to NVRAM as

follows:

Hostname# copy running-config startup-config

Your Cisco 7505 router is now minimally configured and ready to use. If you want to modify the parameters after the initial configuration, use the setup command. To perform more complex configurations, use the configure command. For more information on additional interface configuration and information on more specific system configurations, refer to the Cisco 7500 Series Installation and Configuration Guide.

Image 14
Contents Quick Start Guide Page Install the Hardware Packing ListFor rack-mounting optional Prepare to Install the RouterFor DC-Input Power Supply For cable-management bracketsRack-Mount the Router Optional Install Interface Processors, Fillers, VIPs, and RSPs Attach the Cable-Management Brackets Connect the DC-Input Power Supply Connect the Power SupplyConnect the AC-Input Power Supply Terminal block Cover Captive screws Connect the RSP Start and Configure the System Copy running-config startup-config command Running-config startup-config commandPerform a Basic Configuration Using Setup Configure an Ethernet Interface Perform a Basic Configuration Using Configuration Mode Install Field Replaceable Units FRUs Flash Memory CardsCopy Files to Flash Memory Use the command copy tftpfilename bootflashFormat a Flash Memory Card Enter the boot system flash Make a Flash Memory Card Image BootableEnable Booting from Flash Memory Enter the config-registerPrepare to Remove and Install an RSP Place your thumbs on both ejector levers Check the RSP Installation Check the Interface Processor or VIP Installation Copy the Configuration File for an RSP Writing Router-confg Retrieve the Configuration File for RSPs Systemrunning-config Nvramstartup-config command Remove and Install Port Adapters Remove the Power Supply Replace the Power Supply Page Page Headquarters

7505 specifications

The Cisco Systems 7505 is a robust and versatile router that has been a key player in the networking landscape since its introduction in the 1990s. Known for its reliability and performance, the 7505 is well-suited for enterprise environments that demand high-capacity networking solutions.

One of the main features of the Cisco 7505 is its modular architecture. This allows for significant flexibility in configuration, enabling organizations to tailor the device to their specific requirements. The modular design supports various interface cards, allowing users to customize their connectivity based on the types of networks they operate within. This adaptability makes it an ideal choice for businesses that are looking to scale their network infrastructure as needs evolve.

The Cisco 7505 supports a variety of protocols, including IP, IPX, AppleTalk, and more. This multi-protocol support ensures that organizations can integrate the router into diverse environments, facilitating seamless communication across different systems. The device is also equipped with advanced routing features such as policy-based routing, which allows for improved traffic management and prioritization based on business requirements.

Another essential characteristic of the Cisco 7505 is its performance capabilities. The router is designed to handle high volumes of traffic, making it suitable for both enterprise-level and service provider networks. With support for multiple interfaces and the ability to handle both WAN and LAN traffic, the 7505 can serve as a central hub in complex networking setups.

In terms of security, the Cisco 7505 offers several built-in features to safeguard network integrity. It supports access control lists (ACLs), virtual private networking (VPN), and encryption technologies, providing organizations with tools to protect sensitive data as it traverses the network.

The Cisco 7505 also emphasizes ease of management with its user-friendly Command Line Interface (CLI) and integration with Cisco’s network management tools. This simplifies monitoring, troubleshooting, and configuration processes, allowing network administrators to maintain optimal performance with minimal downtime.

In summary, the Cisco Systems 7505 is a formidable router that combines modularity, multi-protocol support, performance, security, and ease of management. Its features make it an excellent choice for organizations seeking a reliable and versatile networking solution to meet their evolving demands.