Cisco Systems 7505 quick start Rack-Mount the Router Optional

Page 5

Install the Hardware

Rack-Mount the Router (Optional)

18.312" (46.51 cm)

hole centerline to hole centerline

17.72" min. (45 cm)

Mounting strips

M4 x 10-mm

Step 1 Measure the space between the vertical mounting strips on the rack. Conﬁrm that the rack conforms to the measurements shown in A.

Step 2 Use the four M4 x 10-mm screws provided to attach the ears to the sides of the chassis, as shown in B. (Use two screws per ear.)

Warning To prevent injury, two people are required to lift the chassis. Grasp the chassis underneath the lower edge, and lift with both hands. To prevent injury, keep your back straight and lift with your legs, not your back.

Step 3 Use the eight 10-32 x 3/8-inch screws provided to attach the ears to the mounting strips, as shown in C. Use four

Ears (2)

screws (4)

screws per ear and mounting strip.

Step 4 Level the chassis as required. Provide two inches of clearance on either side of the chassis.

10-32 x 3/8-inch
screws (8)	53373
	53373

Image 5

Contents Quick Start Guide Page Packing List Install the HardwareFor DC-Input Power Supply Prepare to Install the RouterFor rack-mounting optional For cable-management bracketsRack-Mount the Router Optional Install Interface Processors, Fillers, VIPs, and RSPs Attach the Cable-Management Brackets Connect the DC-Input Power Supply Connect the Power SupplyConnect the AC-Input Power Supply Terminal block Cover Captive screws Connect the RSP Start and Conﬁgure the System Running-conﬁg startup-conﬁg command Copy running-conﬁg startup-conﬁg commandPerform a Basic Conﬁguration Using Setup Conﬁgure an Ethernet Interface Perform a Basic Conﬁguration Using Conﬁguration Mode Flash Memory Cards Install Field Replaceable Units FRUsCopy Files to Flash Memory Use the command copy tftpﬁlename bootﬂashFormat a Flash Memory Card Enable Booting from Flash Memory Make a Flash Memory Card Image BootableEnter the boot system ﬂash Enter the conﬁg-registerPrepare to Remove and Install an RSP Place your thumbs on both ejector levers Check the RSP Installation Check the Interface Processor or VIP Installation Copy the Conﬁguration File for an RSP Writing Router-confg Retrieve the Conﬁguration File for RSPs Systemrunning-conﬁg Nvramstartup-conﬁg command Remove and Install Port Adapters Remove the Power Supply Replace the Power Supply Page Page Headquarters

7505 specifications

The Cisco Systems 7505 is a robust and versatile router that has been a key player in the networking landscape since its introduction in the 1990s. Known for its reliability and performance, the 7505 is well-suited for enterprise environments that demand high-capacity networking solutions.

One of the main features of the Cisco 7505 is its modular architecture. This allows for significant flexibility in configuration, enabling organizations to tailor the device to their specific requirements. The modular design supports various interface cards, allowing users to customize their connectivity based on the types of networks they operate within. This adaptability makes it an ideal choice for businesses that are looking to scale their network infrastructure as needs evolve.

The Cisco 7505 supports a variety of protocols, including IP, IPX, AppleTalk, and more. This multi-protocol support ensures that organizations can integrate the router into diverse environments, facilitating seamless communication across different systems. The device is also equipped with advanced routing features such as policy-based routing, which allows for improved traffic management and prioritization based on business requirements.

Another essential characteristic of the Cisco 7505 is its performance capabilities. The router is designed to handle high volumes of traffic, making it suitable for both enterprise-level and service provider networks. With support for multiple interfaces and the ability to handle both WAN and LAN traffic, the 7505 can serve as a central hub in complex networking setups.

In terms of security, the Cisco 7505 offers several built-in features to safeguard network integrity. It supports access control lists (ACLs), virtual private networking (VPN), and encryption technologies, providing organizations with tools to protect sensitive data as it traverses the network.

The Cisco 7505 also emphasizes ease of management with its user-friendly Command Line Interface (CLI) and integration with Cisco’s network management tools. This simplifies monitoring, troubleshooting, and configuration processes, allowing network administrators to maintain optimal performance with minimal downtime.

In summary, the Cisco Systems 7505 is a formidable router that combines modularity, multi-protocol support, performance, security, and ease of management. Its features make it an excellent choice for organizations seeking a reliable and versatile networking solution to meet their evolving demands.