Cisco Systems 7505 quick start Systemrunning-config Nvramstartup-config command

Page 26

Install Field Replaceable Units (FRUs)

24

The console display indicates whether or not the operation was successful. A series of exclamation points (!!!!) and [OK] (as shown in the preceding example) indicates that the operation was successful. A series of periods (. . .) and [timed out] or [failed] indicates a failure due to a network fault or an incorrect server name, address, or filename. The following is an example of a failed attempt to boot from a remote server:

Booting Router-confg

[timed out]

If the display indicates that the process was successful, as shown in Step 6, proceed to the next step.

If the display indicates that the process failed, verify the name or IP address of the remote server and the filename, and repeat the preceding steps. If the process fails again, contact your network administrator.

Step 7 Enter the show startup-configcommand to confirm that the configuration file was retrieved correctly. Look at the first line for the configuration file size. Compare it with the file you retrieved from the TFTP server to confirm that it is correct. Following is an example:

Router# show startup-config

Using 1186 out of 126968 bytes

!

version 12.0(9)S hostname Router

!

Router#

Step 8 To ensure that the startup configuration file stored in NVRAM is the default running configuration file used by the system, enter the copy

system:running-config

nvram:startup-config command:

Router# copy system:running-config nvram:startup-config

Router#

%SYS-5-CONFIG_I: Configured from memory by console

Router#

This completes the process for retrieving the

configuration file for the RSP.

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Quick Start Guide Page Install the Hardware Packing ListFor rack-mounting optional Prepare to Install the RouterFor DC-Input Power Supply For cable-management bracketsRack-Mount the Router Optional Install Interface Processors, Fillers, VIPs, and RSPs Attach the Cable-Management Brackets Connect the DC-Input Power Supply Connect the Power SupplyConnect the AC-Input Power Supply Terminal block Cover Captive screws Connect the RSP Start and Configure the System Copy running-config startup-config command Running-config startup-config commandPerform a Basic Configuration Using Setup Configure an Ethernet Interface Perform a Basic Configuration Using Configuration Mode Install Field Replaceable Units FRUs Flash Memory CardsCopy Files to Flash Memory Use the command copy tftpfilename bootflashFormat a Flash Memory Card Enter the boot system flash Make a Flash Memory Card Image BootableEnable Booting from Flash Memory Enter the config-registerPrepare to Remove and Install an RSP Place your thumbs on both ejector levers Check the RSP Installation Check the Interface Processor or VIP Installation Copy the Configuration File for an RSP Writing Router-confg Retrieve the Configuration File for RSPs Systemrunning-config Nvramstartup-config command Remove and Install Port Adapters Remove the Power Supply Replace the Power Supply Page Page Headquarters

7505 specifications

The Cisco Systems 7505 is a robust and versatile router that has been a key player in the networking landscape since its introduction in the 1990s. Known for its reliability and performance, the 7505 is well-suited for enterprise environments that demand high-capacity networking solutions.

One of the main features of the Cisco 7505 is its modular architecture. This allows for significant flexibility in configuration, enabling organizations to tailor the device to their specific requirements. The modular design supports various interface cards, allowing users to customize their connectivity based on the types of networks they operate within. This adaptability makes it an ideal choice for businesses that are looking to scale their network infrastructure as needs evolve.

The Cisco 7505 supports a variety of protocols, including IP, IPX, AppleTalk, and more. This multi-protocol support ensures that organizations can integrate the router into diverse environments, facilitating seamless communication across different systems. The device is also equipped with advanced routing features such as policy-based routing, which allows for improved traffic management and prioritization based on business requirements.

Another essential characteristic of the Cisco 7505 is its performance capabilities. The router is designed to handle high volumes of traffic, making it suitable for both enterprise-level and service provider networks. With support for multiple interfaces and the ability to handle both WAN and LAN traffic, the 7505 can serve as a central hub in complex networking setups.

In terms of security, the Cisco 7505 offers several built-in features to safeguard network integrity. It supports access control lists (ACLs), virtual private networking (VPN), and encryption technologies, providing organizations with tools to protect sensitive data as it traverses the network.

The Cisco 7505 also emphasizes ease of management with its user-friendly Command Line Interface (CLI) and integration with Cisco’s network management tools. This simplifies monitoring, troubleshooting, and configuration processes, allowing network administrators to maintain optimal performance with minimal downtime.

In summary, the Cisco Systems 7505 is a formidable router that combines modularity, multi-protocol support, performance, security, and ease of management. Its features make it an excellent choice for organizations seeking a reliable and versatile networking solution to meet their evolving demands.
Top Page Image Contents