Cisco Systems 7206VXR NPE-400 manual LED Label Color State Function, Enable, Boot, Error

Module Interfaces

LED	Indication	Description
Link	Green	Indicates that the Ethernet RJ-45 receptacle has
		established a valid link with the network.
	Off	This LED remains off during normal operation of the
		router unless there is an incoming carrier signal.
100 Mbps	Green	Indicates that the port is configured for 100-Mbps
		operation (speed 100), or if configured for auto
		negotiation (speed auto), the port has detected a valid link
		at 100 Mbps.
	Off	If the port is configured for 10-Mbps operation, or if it is
		configured for auto negotiation and the port has detected a
		valid link at 10 Mbps, the LED remains off.

The VPN Acceleration Module (VAM) is a single-width acceleration module that provides high-performance, hardware-assisted tunneling and encryption services suitable for virtual private network (VPN) remote access, site-to-site intranet, and extranet applications. It also provides platform scalability and security while working with all services necessary for successful VPN deployments—security, quality of service (QoS), firewall and intrusion detection, and service-level validation and management. The VAM off-loads IPSec processing from the main processor, thus freeing resources on the processor engines for other tasks.

The VAM has three LEDs, as shown in Figure 3.

Figure 3	VAM LEDs
	ENCRYPT/COMP
ENABLE	SA-VAM
BOOT ERROR
	61177

LED Label	Color	State	Function
ENABLE	Green	On	Indicates the VAM is powered up and enabled for
			operation.
BOOT	Amber	Pulses	Indicates the VAM is operating.
		On	Indicates the VAM is booting or a packet is being
			encrypted or decrypted.
ERROR	Amber	On	Indicates an encryption error has occurred. This
			LED is normally off.

All physical interfaces are separated into the logical interfaces from FIPS as shown in Table 1.

FIPS 140-2 Nonproprietary Security Policy for Cisco 7206VXR NPE-400 Router with VAM

OL-3959-01 5