Manufacturing default media advance value (MFNG VAL)

This option displays the manufacturing default media advance value, which is factory set. This cannot be modified by the user. Press OK to access the option to adjust the user-definable media advance value.

Dry time value (DRY TIME VALUE)

Use this option to define the amount of time the printhead carriage pauses between printing passes for the selected media type.

Parameters: three-digit time in seconds.

Print mode setting (PRINT MODE)

Use this option to set the default print quality for the selected media type.

NOTE This value will only be applied by the printer front panel setting if the PRINT MODE PREF option is set to FRONT PANEL.

Parameters:

●NORMAL (4-pass)

●H-QUALITY (8-pass)

●H-DENSITY (8-pass)

●H-QUALITY2

●H-DENSITY2

●FAST (4-pass)

●DRAFT (2-pass)

●FINE DRAFT

Print direction setting (PRINT DIRECTION)

For the selected media type, use this option to set bidirectional printing so that the print carriage places ink on the media at every pass, or unidirectional printing so that the print carriage places ink on the media once every two passes.

ENWW

The MEDIA REG menu

147