HP 9000s manual Load media on to the take-up reel

4.Press ▼ to display the TUR MODE option.

5.Select LOOSE or TENSION and press OK to confirm.

Load media on to the take-up reel

1.Prepare the core tube and 1 m of media. Attach one edge of the media to the tube using tape.

1.Tape

2.Core tube

3.Lead paper

4.Approximately 1 m

NOTE Make sure the lead paper is attached to the correct side of the tube. You may wind the media over the roll for anti-clockwise winding, or under the roll for clockwise winding.

Attach the paper to the core tube in a straight line so that media winding is even.

ENWW Use the take-up reel 43