7.Input the nest origin point (print offset value for media width: origin point).
The nest origin setting is displayed.
The start position for printing is modified if either the media width or the nest origin is set.
A. Nest origin point
B. Print margin including the image
C. Media width input value
8.Select YES or NO.
●Select YES to increase the available area for printing. Rewind the media back onto the roll ensuring the media is present between the media output sensor and media rollers. (The first 20 – 30 mm from the front edge will not be available for printing).
●Select NO if the area from the media output sensor position to the print start position (the media rollers) will not be available for printing.
NOTE Ensure the media is aligned with the vertical guide line before loading.
54 | Chapter 4 How do I... (printing topics) | ENWW |
