Lanier AP3200 Troubleshooting, Error & Status Messages on the Operation Panel, Description, ples”

4. Troubleshooting

Error & Status Messages on the Operation Panel

Messages	Description	Comments
Add Staples	The stapler is empty.	Replace the staple refill with a
		new one. ⇒ P.71 “Adding Sta-
		ples”
Add Toner	The printer is out of toner.	Install a new toner bottle. ⇒
		P.75 “Replacing the Toner Bot-
		tle”
Call Service	There is a malfunction in the	Turn the printer power off and
Power Off On	printer.	on. If the message appears
		again, contact your sales or
		service representative.
Call Service	The Service Code Number	Turn the printer power off and
SC_XXX	identifies the failure.	on. If the message appears
		again, contact your sales or
		service representative.
Close Bridge	The cover of Bridge Unit Type	Close the cover of Bridge Unit
Unit Cover	320 is open.	Type 320.
Close	The cover of the finisher is	Close the cover of the finisher.
Finisher Cover	open.
Close	The front cover is open.	Close the front cover of the
Front Cover		printer.
Close	The cover of CS370 (mailbox)	Close the cover of CS370
Mailbox Cover	is open.	(mailbox) cover.
Close Right	The right cover of the printer	Close the right cover of the
Cover	is open.	printer.
Close R-Cover at	Lower right cover 1 or 2 is	Close lower right cover 1 or 2.
Paper Tray	open.
Close Upper	The upper right cover is open.	Close the upper right cover.
Right Cover
Cls. Interchange	The interchange unit cover is	Close the interchange unit
Unit Cover	open.	cover.
Energy Saver 1	In Energy Saver 1 mode.	Press an operation panel key
		or send a job from the comput-
		er to wake the printer up.

41