Lanier AP3200 manual Photoconductor Unit

4

Troubleshooting

Messages	Description	Comments
Remove Paper from Staple	There is paper in the stack unit	Remove paper from the stack
Tray	of the finisher.	unit of the finisher.

		Important
		❒ Remove the paper from the
		output tray before it be-
		comes full. If you leave pa-
		per in the output tray, it
		can cause a paper misfeed.
Remove Paper Mailbox Tray	The CS370 (mailbox) tray # is	Remove paper from the CS370
#	full.	(mailbox) tray.
	# : Tray Number	Important
		❒ Remove the paper from
		output tray before it be-
		comes full. If you leave pa-
		per in the output tray, it
		can cause a paper misfeed.
Remove Paper Shift Tray	The shift tray of the finisher is	Remove paper from the finish-
	full.	er tray.
		Important
		❒ Remove the paper from the
		output tray before it be-
		comes full. If you leave pa-
		per in the output tray, it
		can cause a paper misfeed.
Remove Paper Standard Tray	The standard output tray is	Remove paper from the out-
	full.	put tray.
		Important
		❒ Remove the paper from
		output tray before it be-
		comes full. If you leave pa-
		per in the output tray, it
		can cause a paper misfeed.
Replace Maintenance Kit	It is time to replace parts in-	Replace Maintenance Kit Type
	cluded in Maintenance Kit	270. For more information
	Type 270.	about how to replace the kit,
		see the “Maintenance Kit Type
		270 Replacement Guide” that
		comes with the kit. After re-
		placing the kit, clean the regis-
		tration rollers. ⇒ P.84
		“Cleaning the Registration Roll-
		er”
Replace PCU	It is time to replace Photo Con-	Replace Photo Conductor Unit
	ductor Unit Type 320.	Type 320. ⇒ P.77 “Replacing
		the Photoconductor Unit”

52