Lanier AP3200 manual Loading Paper and Other Media, Loading Paper in the Paper Tray

Loading Paper and Other Media

Loading Paper and Other Media

Loading Paper in the Paper Tray

This section describes instructions for loading paper whose size and feed di- rection is already set in the standard paper tray and optional PS440. If you want to change the paper size or feed direction, see P.32 “Changing the Paper Tray Size”.

If you want to load paper in PS420, see P.35 “Loading Paper in PS420 (Pa- per Feed Unit)”. If you want to load pa- per in Bypass Tray Type 270, see P.36 “Loading Paper in Bypass Tray Type 270”.

Important

❒Confirm that the setting of the pa- per size dial matches the paper size and feed direction of the paper in the tray. If it does not, misfeeds or unexpected printing results might occur.

Reference

For more information about the size and feed direction of paper that can be loaded in the tray, see P.17 “Paper Types and Sizes”.

A Slide the paper tray out until it stops.

ZAEY012E

B Align all four sides of the paper stack, and load it into the tray.

3

ZAEY030E

Important

❒Do not stack paper over the lim- it mark.

❒When you set thick paper in tray 2, do not stack paper above the lower limit mark (A) of tray 2.

ZAEY052E

Note

❒To avoid paper multi-feeds, shuffle sheets before setting them in the tray.

❒Load paper face up into the tray.

C Slide the tray into the printer un- til it stops.

31