Moving and Transporting the Printer

Mailbox (CS370)

After removing the four mailbox trays, follow these steps.

A If the duplex unit is installed, open the duplex unit by lifting the catch.

B Open the right cover of the printer by lifting the catch, and open the upper cover of the in- terchange unit by pulling the handle.

C Use a coin to remove the two screws securing the mailbox to the printer.

D Pushing the lever inside the up- per cover (A), lift the mailbox and remove it from the printer.

A

ZAEP730E

500–sheet finisher (SR510)

After removing the finisher tray, pull the lock under the finisher (A), lift the finisher and remove it from the printer.

A

ZDEP350E

1000–sheet finisher (SR720)

If you want to remove the 1000– sheet finisher, contact your sales or service representative.

Important

Be sure to disconnect all cables from the printer before transport- ing it.

The printer is a precision piece of machinery. Take care to avoid damage during shipment.

A Slide out the four handles on both sides of the printer.

ZAEP040E

7

 

B By holding the handles, lift the printer. The printer should be held by at least two people.

ZAEP600E

Moving the Printer Close by

A Turn off the printer, and remove all cables and cords from the printer.

B Keeping the printer level, lift and move it.

115

Page 129
Image 129
Lanier AP3200 manual Moving the Printer Close by, Mailbox CS370, Sheet finisher SR510, Sheet finisher SR720