Lanier AP3200 manual Messages, Description, Comments, Remove Paper

4

Troubleshooting

Messages	Description	Comments
Remove Paper	There is still paper in AD380	Remove paper from AD380
from Duplex Unit	(duplex unit).	(duplex unit).
Remove Paper	There is paper in the stack unit	Remove paper from the stack
from Staple Tray	of the finisher.	unit of the finisher.
		Important
		❒ Remove the paper from the
		output tray before it be-
		comes full. If you leave pa-
		per in the output tray, it
		can cause a paper misfeed.
Remove Paper	The CS370 (mailbox) tray # is	Remove paper from the CS370
Mailbox Tray #	full.	(mailbox) tray.
	# : Tray Number	Important
		❒ Remove the paper from
		output tray before it be-
		comes full. If you leave pa-
		per in the output tray, it
		can cause a paper misfeed.
Remove Paper	The shift tray of the finisher is	Remove paper from the finish-
Shift Tray	full.	er tray.
		Important
		❒ Remove the paper from the
		output tray before it be-
		comes full. If you leave pa-
		per in the output tray, it
		can cause a paper misfeed.
Remove Paper	The standard output tray is	Remove paper from the out-
Standard Tray	full.	put tray.
		Important
		❒ Remove the paper from
		output tray before it be-
		comes full. If you leave pa-
		per in the output tray, it
		can cause a paper misfeed.
Replace	It is time to replace parts in-	Replace Maintenance Kit Type
Maintenance Kit	cluded in Maintenance Kit	270. For more information
	Type 270.	about how to replace the kit,
		see the “Maintenance Kit Type
		270 Replacement Guide” that
		comes with the kit. After re-
		placing the kit, clean the regis-
		tration rollers. ⇒ P.84
		“Cleaning the Registration Roll-
		er”

46