Paper and Other Media

Loading Paper in Bypass Tray Type 270

Note

Paper sizes supported by the by- pass tray are approximately 90 -

297 mm (Metric version) or 3.54" - 11.69" (Inch version) in width, and approximately 148 - 432 mm (Met-

3 ric version) or 5.83" - 17.00" (Inch version) in length. Specify a cus- tom size with the printer driver or the operation panel. For more in- formation about using the opera- tion panel, see P.38 “Specifying a Custom Paper Size for the Bypass Tray”.

Limitation

The following functions are not available with the bypass tray:

Duplex print

Auto paper select

Limitless paper feed

Sample print

Locked print

Output from the finisher (sort, shift sort, staple)

A Open the bypass tray.

ZAEY040E

B Lift the paper guide lever (A).

ZAEY210E

Important

If the paper guides do not match the paper size, skew im- ages or paper misfeeds might occur.

Note

Swing out the extender (B) to support paper sizes longer than

A4 short-edge feed (Metric ver- sion) or 81/2" ⋅ 11" short-edge feed (Inch version).

C Load the paper and adjust the pa- per guides to the sides of the pa- per.

ZAEY220E

Important

Confirm the print side of OHP transparencies. Some OHP transparencies can be printed on only one side.

36

Page 50
Image 50
Lanier AP3200 manual Loading Paper in Bypass Tray Type, Open the bypass tray, Lift the paper guide lever a