Cleaning the Pad inside of the Tray

Cleaning the Pad inside of the Tray

If the pad inside of the tray is dirty , multiple feeds might occur when the tray is nearly empty. In this case, clean the pad inside of the each tray. Follow these steps to clean the pad in- side of standard tray 2.

A Slide tray 2 out until it stops.

ZAEY012E

B When there is paper in the tray, remove paper.

C Wipe the pad inside of the tray with a dry cloth.

ZAEY035E

Important

Do not wipe with a wet cloth, al- cohol or cleanser.

D Load paper and slide tray 2 slowly until it stops.

E Clean the pad inside of tray 1 in the same way.

F If PS440 (paper feed unit) is in- stalled, clean the pad inside of tray 3 or tray 4 in the same way.

4

83

Page 97
Image 97
Lanier AP3200 manual Cleaning the Pad inside of the Tray