Lanier AP3200 Macintosh, That Require Options, Eration panel. ⇒ P.93 Using the Operation Panel

	Printer Does Not Print
Possible Cause	Solutions
If you print using the Post-	The data is cleared when the Job Timeout period is exceeded.
Script driver, printing	❖ Windows 95/98/Me
does not start or is inter-
rupted.	Set a longer [Job Timeout] period with the [PostScript] tab of the
	Printer Properties.
	❖ Windows 2000
	Set a longer [Job Timeout:] period with the [Device Settings] tab
	of the Printer Properties.
	❖ Windows NT 4.0
	Set a longer [Job Timeout] period with the [Device Settings] tab of
	the Printer Properties.
	❖ Macintosh
	Set a longer [Job Timeout] period.
	A PostScript error might occur if there is not enough memory in
	the printer, or there are errors in the print data sent to the printer.
	• Print a configuration page to configure the memory size and
	confirm the memory size is max or not.
	• If the memory size is not the maximum, increasing the memory
	may solve this problem. Install Memory Unit TypeB. Other-
	wise you should contact your sales or service representative.
	For more information about the memory, see P.113 “Functions
	That Require Options”.
	The print job might be reset. Do the following.
	• Confirm that you have selected the correct printer driver. Try
	printing again.
	• Set a longer Wait Timeout.
	❖ Windows 95/98/Me
	Set a longer [Wait Timeout] period with the [PostScript] tab of
	the Printer Properties.
	❖ Windows 2000
	Set a longer [Wait Timeout:] period with the [Device Settings]
	tab of the Printer Properties.
	❖ Windows NT 4.0
	Set a longer [Wait Timeout] period with the [Device Settings]
	tab of the Printer Properties.
	❖ Macintosh
	You can specify a longer “I/O Timeout” period on the op-
	eration panel. ⇒ P.93 “Using the Operation Panel”

4

59