Lanier AP3200 manual Tray, Messages, Description, Comments, A Press Form Feed, Enter #

Troubleshooting

	Messages	Description	Comments
	Error 40724	Tray 3 cannot be used.	Press {Job Reset}. Contact
			your sales or service represen-
			tative.
	Error 40725	Tray 4 cannot be used.	Press {Job Reset}. Contact
			your sales or service represen-
			tative.
	Error 40740	The staple tray of the finisher	Press {Job Reset}. Contact
		cannot be used.	your sales or service represen-
			tative.
	Error 40744	The finisher cannot be used.	Press {Job Reset}. Contact
			your sales or service represen-
			tative.
4	Form Feed...	Doing form feed.	Wait for a while.
	Load Bypass xx	The bypass tray is out of pa-	Load paper of the indicated
		per.	paper size into the bypass
		xx : Paper Size	tray.
		The paper size specified with	A Press {Form Feed}.
		the printer driver differs from	If there is paper in the bypass
		the paper size specified with	tray, the printer starts print-
		the operation panel.
			ing.
			If there is no paper in the by-
			pass tray, the following mes-
			sage appears on the panel
			display. In this case, go to next
			step.
				Form Feed
				Tray 1
				B Press {T} or {U} to select
			the paper tray and then press
			{Enter #}.
			The printer starts printing.
	Load Tray # xx	There is no paper in the indi-	Load paper of the indicated
		cated tray.	paper size into the indicated
		# : Tray Number	paper tray.
		xx : Paper Size
	Load *** xx	There is no paper size of the	Load paper of the indicated
		indicated paper type.	paper size and paper type into
		***: Paper Type (plain, special,	the tray.
		recycled)
		XX: Paper Size

50