Lanier AP3200 manual Messages, Description, Comments, “Sample Print”, “Job Control Menu”

Error & Status Messages on the Operation Panel

Messages	Description	Comments
No Files Exist	There is no sample print file	To confirm whether the sam-
	on the printer hard disk.	ple print file was sent to the
		printer correctly, see P.85
		“Sample Print”.
	There is no locked print file on	To confirm whether the locked
	the printer hard disk.	print file was sent to the print-
		er correctly, see P.88 “Locked
		Print”.
Offline	Printer is offline. The printer	If you want to put the printer
	cannot accept or print out da-	online, press {On Line}.
	ta.
Paper Setting	The tray specified when send-	Set the tray correctly.
	ing locked print data to the
Error			4
	printer is not set.
Power Off On	An error with the NV-RAM	Turn the printer power off and
14FF	has occurred.	on. If the message appears
		again, contact your sales or
		service representative.
Printing...	Printing after second the set	Wait for a while.
	with the sort function.
Processing...	Print data is being processed.	Wait for a while.
Processing...	You have tried to print a sam-	Wait until the printer returns
Please Wait	ple print or locked print data	to the ready condition.
	while the data is being written
	to the printer hard disk.
Ready	The printer is ready for print-	—
	ing.
Release	The indicated tray is locked.	Unlock the indicated tray with
Tray Locking		the operation panel. ⇒ P.99
		“Job Control Menu”
Remove Misfeed	There is a misfeed in AD380	Remove the misfed paper
from Duplex Unit	(duplex unit).	from AD380 (duplex unit). ⇒
		P.64 “Removing Misfed Paper”
Remove Misfeed	There is a misfeed in the fin-	Remove the misfed paper
from Finisher	isher.	from the finisher. ⇒ P.64 “Re-
		moving Misfed Paper”
Remove Misfeed	There is a misfeed in CS370	Remove the misfed paper
from Mailbox	(mailbox).	from CS370 (mailbox). ⇒ P.64
		“Removing Misfed Paper”
Remove Paper	All output trays are full.	Remove paper from output
From All Trays		trays.
Remove Paper	The finisher tray is full.	Remove paper from the finish-
Finisher Tray		er tray.

45