Lanier AP3200 manual Push down the paper guide lever, Press Menu Following message appears

Loading Paper and Other Media

Note Reference

❒Do not stack paper over the lim- it mark. If you do, skew images or paper misfeeds might occur.

❒When you set custom size or thick paper on the bypass tray, do not stack paper above the lower limit mark of the bypass tray.

❒To avoid paper multi-feeds, shuffle sheets before setting them in the tray.

❒Load the paper face down into the tray.

D Push down the paper guide lever.

ZAEY250E

Note

❒If the paper guide lever is not pushed down, paper misfeeds might occur.

E Configure the tray for the loaded paper size and paper feed direc- tion.

Important

❒The paper size selected with the printer driver overrides the one selected here.

For more information about configuring the bypass tray with the printer driver, see the printer driver Help.

For more information about configuring custom paper, see P.38 “Specifying a Custom Paper Size for the Bypass Tray”.

A Press {Menu}.	3
The following message appears

on the panel display.

Main Menu:

Sample Print

B Press {T} or {U} until the fol- lowing message appears.

Main Menu:

Job Control

CPress {Enter #}.

The following message appears on the panel display.

Job Control:

Paper Input

DPress {Enter #}.

The following message appears on the panel display.

Paper Input:

Tray Priority

E Press {T} or {U} until the fol- lowing message appears.

Paper Input: Bypass Size

37