Lanier AP3200 manual Getting Printer Information over the Network, Printer current status, Telnet

Troubleshooting

Getting Printer Information over the Network

Printer current status

You can check the printer's current status using telnet.

❖UNIX

Use the lpq command or stat parameter of rsh, rcp, or ftp.

❖telnet

Use status command.

	Reference
4	For more information, see “Remote Maintenance by telnet” in the Operat-
	ing Instructions for the Network Interface Board included as a PDF file on
	the CD-ROM.
	Messages	Description	Comments
	Add Staples	The stapler is empty.	Replace the staple refill with a
			new one. ⇒ P.71 “Adding Sta-
			ples”
	Add Toner	The printer is out of toner.	Install a new toner bottle. ⇒
			P.75 “Replacing the Toner Bot-
			tle”
	Call Service Power Off On	There is a malfunction in the	Turn the printer power off and
		printer.	on. If the message appears
			again, contact your sales or
			service representative.
	Call Service SC_XXX	The Service Code Number	Turn the printer power off and
		identifies the failure.	on. If the message appears
			again, contact your sales or
			service representative.
	Close Bridge Unit Cover	The cover of Bridge Unit Type	Close the cover of Bridge Unit
		320 is open.	Type 320.
	Close Finisher Cover	The cover of the finisher is	Close the cover of the finisher.
		open.
	Close Front Cover	The front cover is open.	Close the front cover of the
			printer.
	Close Mailbox Cover	The cover of CS370 (mailbox)	Close the cover of CS370
		is open.	(mailbox) cover.
	Close Right Cover	The right cover of the printer	Close the right cover of the
		is open.	printer.
	Close R-Cover at Paper Tray	Lower right cover 1 or 2 is	Close lower right cover 1 or 2.
		open.
	Close Upper Right Cover	The upper right cover is open.	Close the upper right cover.

48