Lanier AP3200 manual Loading Thick Paper Envelopes or OHP, Transparencies

Paper and Other Media

Important

❒Confirm that the setting of the paper size dial matches the pa- per size and feed direction of the paper in the tray. If is does not, misfeeds or unexpected printing results might occur.

❒When the actual paper size is

not shown on the dial, set the dial to "p" and select the paper

3	size using the operation panel.
	For more information about set-

ting up the paper size, see P.17 “Paper Types and Sizes”.

J Slide the tray into the printer un- til it stops.

Loading Thick Paper,

Envelopes or OHP

Transparencies

You can load thick paper, envelopes or OHP transparencies into the tray 2.

When thick paper or OHP transpar- encies are loaded, switch the lever in- side of the paper tray.

Reference

For more information about load- ing paper, see P.17 “Paper and Oth- er Media”.

Important

❒When you set thick paper in tray 2, do not stack paper above the lower limit mark (A) of tray 2.

ZAEY052E

A Change the lever on the paper size dial of the tray 2 (A) to "Non- Standard Paper” mode.

A yellow line appears under the paper size indicated on the front of the paper tray (B).

ZAEH260E

Note

❒Return the lever to the left side, after you have finished printing on thick paper, envelopes or OHP transparencies.

Limitation

❒If “Non-Standard Paper” mode is selected, the following func- tions are not available with tray 2:

•Duplex print

•Auto paper select

•Limitless paper feed

•Sample print

•Locked print

•Output from the finisher (sort, shift sort, staple)

34