Lanier AP3200 manual Loading Paper in PS420 Paper Feed Unit

Loading Paper and Other Media

Loading Paper in PS420 (Paper Feed Unit)

This section describes instructions to load paper in the optional paper feed unit PS420. You can load A4 long-edge feed (Metric version) or 81/2" ⋅ 11" long-edge feed (Inch version) size into PS420.

Note

❒Load paper of the same size in the right and left sides of the paper feed unit.

A Slide the paper tray out until it stops.

ZAEY200E

Important
❒ Align the paper so that the left
stack is flush with the left side,
and the right stack is flush with
the right side.
❒ Do not stack paper over the lim-
it mark.
❒ Confirm that the end fence (A)
locks completely after loading
the right stack.	3
❒ If you want to change the paper

size, contact your sales or ser- vice representative.

Note

❒To avoid paper multi-feeds, shuffle sheets before setting them in the tray.

❒Load the paper face up into the tray.

C Slide the tray into the printer un- til it stops.

B Load the paper completely into the tray.

ZAEY201E

35