Cisco Systems 7513 manual Removing Older Power Supplies, OFF position

Page 15

Removing Older Power Supplies

Removing Older Power Supplies

Follow these steps to remove an older power supply (Part Number 34-0049-01 or later):

 

Step 1

Turn OFF (O) the system power switch on the power supply you plan to remove.

H3117

Step 2

If possible, turn OFF the circuit breaker to which the system is connected and tape the breaker switch in

 

 

 

 

the OFF position.

 

 

 

 

 

Warning

This unit might have more than one power cord. To reduce the risk of electric shock, disconnect the

 

 

 

two power supply cords before servicing the unit. (To see translated versions of this warning, refer

 

 

 

to page 19.)

 

 

 

 

 

Step 3

Disconnect the power cable from the power receptacle of the power supply to be replaced.

 

Step 4

Use the large slotted screwdriver to loosen the captive screw that secures the power supply to the chassis

 

 

 

frame. (See .) Only loosen the captive screw of the power supply you are removing.

 

 

 

Figure 8

Removing an Older Power Supply

AC

FAN OUTPUT

 

OK

OK

FAIL

 

H3029

I

0

Step 5 Grasp the power supply handle and pull the power supply about halfway out of the bay. Then with your other hand under the power supply, pull it completely out of the bay. (See .)

Upgrading the 1200-Watt, AC-Input Power Supplies in the Cisco 7513

 

OL-6324-01

15

 

 

 

Image 15
Contents Copyright 2004 Cisco Systems, Inc. All rights reserved Label on the New AC-Input Power Supply Right Side View Determining the Power Supply ModelReceptacle Product OverviewCisco 7513 Rear-Panel View with the New Power Supplies Specification Rating Power Supply SpecificationsAC-Input Power Supply LEDs, New Power Supply Power Supply LED IndicationsPower Environmental Monitoring Environmental Monitoring and Reporting FunctionsNormal High Warning High Critical Shutdown Router# show env last Environmental ReportsRouter# show env table Installation Safety, ESD Precautions, and Tools Required Safety GuidelinesSafety with Electricity Preventing Electrostatic Discharge Damage Tools and Parts RequiredCircuit Protection Requirements Replacing Older AC-Input Power SuppliesOFF position Removing Older Power SuppliesSupporting the Older Power Supply Installing New Power SuppliesSupporting the New Power Suppl Checking the New Power Supply Installation Power Cord Warning Ordering Documentation Related DocumentationObtaining Documentation Cisco.comCisco Technical Support Website Submitting a Service RequestDocumentation Feedback Obtaining Technical AssistanceObtaining Additional Publications and Information Definitions of Service Request SeverityObtaining Additional Publications and Information OL-6324-01

7513 specifications

The Cisco Systems 7513 is a robust router designed to address the demands of high-performance networking environments. Introduced as part of Cisco’s flagship 7500 Series, the 7513 is engineered to cater to enterprise and service provider requirements, delivering high availability, advanced traffic management capabilities, and exceptional scalability.

One of the key features of the Cisco 7513 is its modular architecture. This design allows for a mix-and-match approach to network interfaces, meaning that organizations can customize their routing capabilities according to specific needs. The router supports a variety of interface cards, including Ethernet, ATM, and POS (Packet over SONET) options, enabling seamless integration into different network topologies.

The 7513 is powered by Cisco’s innovative IOS (Internetwork Operating System), which is renowned for its reliability and feature-rich capabilities. This OS supports advanced routing protocols, including BGP, OSPF, and EIGRP, ensuring efficient data handling and routing decisions across complex and geographically dispersed networks. Additionally, the router accommodates Quality of Service (QoS) features that prioritize network traffic to guarantee optimal performance for critical applications.

In terms of performance, the Cisco 7513 can handle substantial data throughput, equipped with a powerful processor and sufficient memory capacity to support dynamic routing table populations and extensive functionalities. It is capable of delivering a routing capacity that meets the needs of both small enterprises and large service providers, making it a flexible choice.

Another significant characteristic of the 7513 is its support for redundancy and failover mechanisms. With options for redundant power supplies and enhanced cooling systems, the router is designed to operate continuously, ensuring high availability and minimal downtime. Furthermore, it supports Cisco’s High Availability features, such as Stateful Switchover, enhancing network reliability.

Security is an essential aspect of any modern router, and the Cisco 7513 comes equipped with various built-in security functionalities. These include access control lists (ACLs), Network Address Translation (NAT), and support for Virtual Private Networks (VPNs), which enable organizations to secure their data transmissions effectively.

In summary, the Cisco Systems 7513 is a versatile, high-capacity modular router suitable for a wide range of networking applications. Its advanced features, reliability, and scalability make it a critical component for enterprises and service providers seeking to enhance their infrastructure and meet evolving bandwidth demands. With its capacity to support diverse technologies and protocols, the 7513 remains a cornerstone in the realm of professional networking solutions.