Cisco Systems MC-413 manual CCS Frame-Forwarding Configuration Example, MC-433

Page 21

Configuring Support for PBX Signalling Protocols

CCS Frame-Forwarding Configuration Example

CCS Frame-Forwarding Configuration Example

The following configuration example configures CCS frame-forwarding on controller E1. Other commands necessary for the configuration are included.

!version 12.0

no service pad

service timestamps debug uptime service timestamps log uptime no service password-encryption

!

hostname c3810a

!

logging buffered 4096 debugging

!

network-clock base-rate 56k ip subnet-zero

no ip domain-lookup ip host rb 10.1.1.1

!

!

!

stun peer-name 10.1.1.1 stun protocol-group 1 basic

!

controller E1 1

framing NO-CRC4 Australia clock source internal mode ccs frame-forwarding

voice-group 1 timeslots 1-2 type ext-sig-master

!

!

!

interface Ethernet0

ip address 144.254.156.169 255.255.255.0 no ip directed-broadcast

no ip route-cache no ip mroute-cache no keepalive

!

interface Serial0

ip address 10.1.1.2 255.255.255.0 no ip directed-broadcast encapsulation frame-relay

no ip route-cache no ip mroute-cache no arp frame-relay bandwidth 256

no keepalive no fair-queue

serial restart-delay 0

frame-relay interface-dlci 30 voice-encap 80 hold-queue 1024 out

!

interface Serial1 no ip address

no ip directed-broadcast encapsulation stun

no ip route-cache no ip mroute-cache stun group 1

stun route all interface Serial0 dlci 30

!

Cisco IOS Multiservice Applications Configuration Guide

MC-433

Image 21
Contents MC-413 Benefits of Q.SIGMC-414 Cisco AS5300 Q.SIG Signalling ConfigurationConfiguring VoIP Q.SIG SIG Configuration Task ListIsdn-switch-type command for Q.SIG SIG Prerequisite TasksMC-416 SerialMC-417 MC-418 Verifying VoIP Q.SIG Software on the Cisco AS5300MC-419 SIG for VoIP Configuration ExampleMC-420 MC-421 Configuring Q.SIG PRI Signalling Support on the Cisco MC3810MC-422 SIGMC-423 MC-424 Pri-group timeslot 1-31 commandMC-425 SIG PRI Signalling on the Cisco MC3810 Configuration ExampleNo logging event link-status MC-426MC-427 Configuring CCS Cross-ConnectConfiguring CCS Cross-Connect for T1 Configuring CCS Cross-Connect for E1MC-428 MC-429 Configuring T1/E1 Trunk Bearer ChannelsConfiguring CCS Frame-Forwarding Ext-sig-slave for the voice-group commandMC-430 CCS Frame-Forwarding MC-431MC-432 MC-433 CCS Frame-Forwarding Configuration ExampleMC-434

MC-413 specifications

Cisco Systems MC-413 is a powerful solution developed for network communication and data management, particularly within enterprise environments. This versatile hardware device is specifically designed to enhance network functions, data throughput, and operational efficiency. The MC-413 is distinguished by its impressive feature set, which makes it an invaluable asset for organizations looking to optimize their digital infrastructure.

One of the key characteristics of the MC-413 is its scalability. Designed to support both small to medium-sized businesses and large enterprises, it offers modular capabilities that allow users to customize resources according to their specific needs. This flexibility is crucial for organizations that experience fluctuating workloads or aim to future-proof their network investments.

The MC-413 is equipped with Cisco's cutting-edge security features, ensuring that sensitive data is protected from potential threats. It incorporates advanced encryption protocols and access controls to safeguard against unauthorized access and cyberattacks. This emphasis on security is vital for businesses operating in today's digital landscape, where data breaches pose significant risks.

Performance-wise, the MC-413 offers exceptional speed and reliability. It employs advanced routing and switching technologies that ensure seamless data transmissions across networks. With low latency and a high throughput rate, organizations can rely on the MC-413 to support data-heavy applications and multimedia content without experiencing disruptions.

Cisco's integrated management tools are another highlight of the MC-413. These tools facilitate easy configuration, monitoring, and troubleshooting. Network administrators can gain insight into performance metrics and quickly identify potential issues before they escalate. This proactive approach to network management enhances operational efficiency and minimizes downtime, which is crucial for maintaining business continuity.

Additionally, the MC-413 supports various technologies, including voice and video communication. It is optimized for Unified Communications, enabling organizations to streamline their communication processes and enhance collaboration among teams. By integrating these capabilities into their networks, businesses can improve productivity and foster better decision-making.

In summary, Cisco Systems MC-413 stands out as a robust solution designed to meet the demands of modern enterprises. With its scalability, advanced security features, high performance, and integrated management tools, it equips organizations with the necessary resources to thrive in a competitive digital landscape. As businesses continue to evolve, the MC-413 remains a versatile and dependable choice for network infrastructure enhancement.