Cisco Systems 600W Items Included with Cisco RPS, Separately Orderable Items, Items Not Included

Page 4

Related Hardware Installation

Additional hardware installation documents provide information about installing interconnection adapters in routers and about rack-mounting the Cisco RPS.

You can access these document sat Cisco Product Documentation > Access Servers and Access Routers > Cisco 600W Redundant Power System > Procedures for Spare Parts: Adapter Plates and Rack Brackets.

Release Notes

Release notes for the Cisco RPS provide information about the use of the Cisco RPS with various switches, hubs, and repeaters.

You can access this document at Cisco Product Documentation > Access Servers and Access Routers > Cisco 600W Redundant Power System > Cisco Redundant Power System (RPS) Release Notes.

Items Included with Cisco RPS

The following items are supplied with each Cisco RPS except as noted:

•Rack-mount brackets with screws for 19-inch rack

•Two AC power cords

•(With Cisco RPS -CAB model only) Four 1-to-1 DC output cables, 22-pin to 18-pin, for quasi-redundant DC power for:

–Cisco hubs and switches

–Cisco 2600 series routers; Cisco 3620, Cisco 3640, and Cisco 3725 routers; and Cisco 4000 series routers

•Regulatory Compliance and Safety Information document

•Cisco Redundant Power System Quick Start Guide (this document)

Separately Orderable Items

One or more of the following cables are required for use with the Cisco RPS -NCAB model, which ships without DC output cables. See Table 2 on page 8 for cable usage and ordering information.

•1-to-1 DC output cable, 22-pin to 18-pin

•1-to-1 DC output cable, 22-pin to 8-pin

•2-to-1 Y cable, 22-pin to 18-pin or 22-pin to 8-pin

The following optional rack-mounting brackets can be ordered separately:

•Rack-mount brackets with screws for 23-inch and 24-inch racks

•Rack-mount brackets with screws for telco racks

An RPS adapter module is required for each of the following Cisco devices powered by a Cisco RPS: Cisco 2500 series routers; Cisco 2600 series routers; Cisco 4000 series routers; Cisco 3620, Cisco 3640, and Cisco 3725 routers, and Cisco MC3810 series concentrators. See Table 1 on page 8 for adapter plate usage and ordering information.

Items Not Included

Individual items in this list may be required for your application:

•Interface module to adapt the router or concentrator for use with the Cisco RPS

•Four screws for installing the chassis in a rack

•Phillips screwdriver

•Small blade screwdriver

•Cable ties for cable management

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Quick Start Guide Duration of Hardware Warranty Cisco 90-Day Limited Hardware Warranty TermsReplacement, Repair, or Refund Policy for Hardware To Receive a Return Materials Authorization RMA Number Documents, Equipment, and ToolsUser Documentation Cisco RPS DocumentationSeparately Orderable Items Items Included with Cisco RPSItems Not Included Install the Chassis Safety InformationChassis Installation Methods Installation in a RackAttaching Brackets Brackets for Telco Rack-MountingInstallation on a Desktop Installing the Chassis in a RackConnect Cables Connection Options and RequirementsPowered Device RPS Interface Module DC-Powered Device Cable Description NumberConnection Methods and Cables Cable OrderQuasi-Redundant Configuration Cable Connection Procedures Redundant-with-Reboot ConfigurationThis device Information document that accompanied this deviceRPS Connector Location on a Cisco Switch Typical Connecting AC Power Cables to the Cisco RPS Power Up the Equipment Obtaining DocumentationObtaining Technical Assistance Documentation CD-ROMCisco TAC Website Cisco TAC Escalation CenterObtaining Additional Publications and Information Page Page USA
Top Page Image Contents