Baracoda All in One Printer manual Decoder commands, 0x63, 0x80

Data Capture

for Workforce

in Motion

Command ID	0x63
Description	Set remote triggering settings
Length	7
payload	ABCDEFG
	where :
	A = character to trigger a Good Read signal
	B = character to trigger a Good Read signal
	C = character to trigger a Simple Scan
	D = character to start an Multiscan Session
	E = character to stop an Multiscan Session
	F = character to lock the scan engine
	G = character to unlock the scan engine
Response	0 (1 = ERROR)

3.8. Decoder commands

Command ID	0x80
Description	Get symbology settings
Length	0 or 1
payload	none
Response	17 or 20 bytes (since version 3.02.03) (cf. Appendix
	B for more details)
	If length = 0 then 17 bytes, if length = 1 then 20
	bytes
	Default value:
	0xB4 0x90 0xEF 0x20 0x36 0x00 0x00 0x00 0x77 0x00 0x00 0x00 0xE3
	0x2F 0x08 0x00 0x1D

ToughRunners / ScanWear – Communication Protocol v1.2 - 17 -