Verifying Contents After Unpacking

Temperature and Humidity Requirements

Table 1 and Table 2 list the nominal operating and non-operating environment requirements. Any measurements that approach the minimum or maximum of a range indicate a potential problem.

Table 1	Operating Environment

Specification		Minimum	Maximum

Temperature, ambient operating		32°F (0°C)	104°F (40°C)

Humidity, ambient (non-condensing) operating		10%	90%

Altitude, operating and non-operating		–197 ft (–60 m)	13,123 ft (4000 m)

Vibration, operating		—	5 to 200 Hz, 0.5 g (1 octet/min.)

Table 2	Non-operating Environment

Specification		Minimum	Maximum

Temperature, ambient non-operating and storage		–4°F (–20°C)	149°F (65°C)

Humidity, ambient (non-condensing) non-operating and storage		5%	95%

Altitude, operating and non-operating		–197 ft (–60 m)	13,123 ft (4000 m)

Vibration, non-operating		—	5 to 200 Hz, 1 g (1 octet/min.)
			200 to 500 Hz, 2 g (1 octet/min.)

Power cables, manuals, and other additional items are packaged in separate boxes. After you have unpacked the system, verify that you have received all the required components and documentation.

Step 1 Using the packing list as a guide, verify that you have received everything that is listed, including the following:

a.System hardware documentation and software documentation (if ordered).

b.Optional equipment that you ordered, such as transceivers (GBICs), flash cards, cables, or special connectors.

Step 2 Check that all equipment you ordered is installed in the chassis.

Step 3 Ensure that the system configuration matches the packing list.