Cisco Systems ASASSMCSC10K9 quick start Updated May 15, 2013

Page 2

Updated: May 15, 2013, 78-19998-02

1Information About the ASA Services Module in the Switch Network

For switch and software compatibility with the ASA Services Module (ASASM), see the following: http://www.cisco.com/en/US/docs/security/asa/compatibility/asamatrx.html. The switch runs Cisco IOS software on both the switch supervisor engine and the integrated Multilayer Switch Feature Card (MSFC). The ASASM runs its own operating system.

Although you need the MSFC as part of your system, you do not have to use it. If you choose to do so, you can assign one or more VLAN interfaces to the MSFC (known as switched virtual interfaces (SVIs)). You can alternatively use an external router instead of the MSFC.

In single context mode, you can place the MSFC or router in front of the ASASM or behind the ASASM; location depends on the VLANs that you assign to the ASASM interfaces.

MSFC/Router Behind the ASASM

MSFC/Router In Front of the ASASM

Internet

Internet

Router

 

VLAN 200

VLAN 100

 

MSFC/Router

ASASM

 

 

VLAN 200

VLAN 201

MSFC/Router

VLAN 301

VLAN 303

VLAN 201

Inside

HR

Inside

 

VLAN 302

 

 

DMZ

 

ASASM

VLAN 203

HR

VLAN 202

DMZ

2

Image 2
Contents Cisco ASA Services Module Updated May 15, 2013 Admin Inside Network Customer a Customer B Customer C Verifying the Module Installation Assigning VLANs to the ASA Services ModuleUsing the Msfc as a Directly-Connected Router Logging Into the ASA Services Module Configuring Asdm Connectivity Logging Out of the ASA Services ModuleEnables Dhcp for the management host on Asdm Launching Asdm Click Run Startup WizardRunning the Startup Wizard Page Advanced Configuration Optional Running Other Wizards in AsdmCisco Systems, Inc