For multiple context mode, if you place the MSFC or router behind the ASASM, you should only connect it to a single context. If you connect it to multiple contexts, the MSFC/router will route between the contexts, which might not be your intention. The typical scenario for multiple contexts is to use a router in front of all the contexts to route between the Internet and the switched networks.
Admin Context
VLAN 300
VLAN 301
Context A
Internet
VLAN 100
MSFC/Router
VLAN 303
VLAN 302
Context B | Context C |
VLAN 200 | VLAN 201 | VLAN 202 | VLAN 203 |
Admin | Inside | Inside | Inside |
Network | Customer A | Customer B | Customer C |
3