Cisco Systems manual Cisco IAD2430-24FXS IAD, Cisco IAD2431-8FXS IAD

Page 19

Chapter 1 Overview of Cisco IAD2430 Series IADs

Overview

Warning Ultimate disposal of this product should be handled according to all national laws and regulations.

Statement 1040

Cisco IAD2430-24FXS IAD

The Cisco IAD2430-24FXS IAD provides 24 analog foreign exchange station (FXS) ports with two 10/100BASE-T ports. The chassis (Figure 1-3) has the following interfaces:

•RJ-21 analog voice interface

•Two 10/100BASE-T ports

•External flash memory slot

•AC and DC power inputs

Figure 1-3 Cisco IAD2430-24FXS Chassis

88838

Cisco IAD2431-8FXS IAD

THe Cisco IAD2431-8FXS IAD (Figure 1-4) provides eight analog FXS ports, two 10/100BASE-T ports, and one T1/E1 WAN port. The chassis has the following interfaces:

•RJ-21 analog voice interface

•One T1/E1 port

•One 10/100BASE-T port

•One WIC/VIC slot

•External flash memory

•AC and DC power inputs

Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide

 

OL-4234-06

1-3

 

 

 

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Text Part Number OL-4234-06 Americas HeadquartersCopyright 2003 2008 Cisco Systems, Inc. All rights reserved N T E N T S Safety Tips Cable Connecting to a Remote PC Organization AudienceChapter Title Description Conventions Safety WarningsConvention Description Hinweis Bewahren SIE Diese Sicherheitsanweisungen AUF Waarschuwing Belangrijke VeiligheidsinstructiesOBS! Spara Dessa Anvisningar Page Guarde Estas Instruções Xiii Xiv Product Serial Number LocationSerial Number Location on Cisco IAD2430 Series Routers Accessibility Cisco Product Document Title and URL Related DocumentationOverview Overview of Cisco IAD2430 Series IADsCisco IAD2430 Series IADs Front Panel Cisco IAD2431-8FXS IAD Cisco IAD2430-24FXS IADCisco IAD2431-1T1E1 IAD Cisco IAD2431-16FXSCisco IAD2435-8FXS IAD Cisco IAD2432-24FXS IADCisco IAD2435-8FXS Chassis Physical Description10 Cisco IAD2435 Series IAD Back Panel Function Options LEDsCisco IAD2435 Series LEDs LED/Color DescriptionLED/Color LED Color and Description Chassis GroundingMemory Port Numbering ConventionsSoftware Elements SpecificationsConfiguration Connections Configuration MethodsManual Configuration Interfaces and Service CapabilitiesWAN Deployment Options Configuration OptionsCisco IAD2430 Series RJ-21 T1/E1 T1/E1 with T1/E1 Interface to PBX Location and Mounting Requirements Temperature Control and VentilationPower Source Access to ChassisChassis Grounding EIA/TIA-530/EIA/TIA-530A DCE/DTE Cable TypesT1/E1-WAN Port Maximum Distances Signal Rate Distance Feet Distance MetersDistance Limitations for Interface Cables Fast Ethernet Maximum DistanceEIA/TIA-449, V.35, and X.21 Speed and Distance Limitations FXO Analog Voice Port Maximum Distance Interference ConsiderationsT1/E1-PBX Digital Voice Port Maximum Distances FXS Analog Voice Port Maximum DistanceInstalling Cisco IAD2430 Series IADs Safety Tips Safety RecommendationsMaintaining Safety with Electricity General Safety PracticesSite Log Keeping Track-ChecklistPreventing Electrostatic Discharge Damage Mounting Tools and Equipment Installation ChecklistTask Verified by Date Unpacking and Inspection Rack-Mounting the Chassis Quick Installation Bracket for Cisco IAD2435-8FXS RoutersAttaching the Brackets Mounting ScrewsTelco 19-Inch Rack Installation-Back Panel Forward Installing the Cisco IAD2430 Series IADs in a RackAttaching the Chassis to the 19-Inch Rack Wall-Mounting the Chassis10shows the orientation required for installation 10 Wall-Mounting the Chassis Wall-Mounting the Cisco IAD2435 IADsRubber feet 12 Mounting the IAD2435 Router on a Wall Setting the Cisco IAD2435 on a Desktop Installing the Ground ConnectionDesktop-Mounting the Chassis Page To a torque of 8 to 10 in-lb 0.9 to 1.1 N-m 16 Chassis Ground Connection Using Ring Terminal Installing a WAN or Voice CardCisco IAD ports are color-coded for identification Connecting CablesNebs Tests Results LAN and Power CablesConnected To Cable 17 LAN and Administrative Access Connections Procedure Connecting the Input Power19 Connecting the External Power Supply to the Cisco IAD2435 Connecting the Console Port to a PC or an Ascii TerminalConnecting the Auxiliary Port to a Modem Color or Type Connected To Cable WAN and Voice Cables20 WAN and Voice Connections Connecting the RJ-21 Cable in the Velcro Harness22 Sliding the RJ-21 Cable Through the Velcro Harness 24 Tightening the Captive Screws DTE only with EIA/TIA -530 signaling Use an RJ-48 T1/E1 cable not included Connect the RJ-48 T1/E1 cable to the T1/E1 port. See Figure Connecting the Digital Voice Port to a T1/E1-PBXCisco IAD Port Port Color Connector/Cable Interface To Ports, Connectors, and PinoutsRemote Terminal Connections If Applicable Connecting to a Remote PC Connecting to a ModemConnecting to a Remote Ascii Terminal Connecting a Backup Battery to a DC-Powered IAD Connecting Backup PowerCisco IAD2430 Model Power Consumption Watts Pin Number Description 30 Connecting a Backup Battery to a DC-Powered Cisco IAD32shows a setup using a UPS OL-4234-06 Power-On Procedure Checklist for Power-OnInitial Configuration Procedures Press Return or Enter. The following message is displayed Cisco IOS CLISetup Command Facility Configuration is displayed Setting the Fast Ethernet Port IP Address Manual ConfigurationObtaining Your Network Information Command Purpose Configuring a T1/E1 Port for a WAN ConnectionVerifying and Saving Your Configuration Configuring Digital VoiceNvram TroubleshootingSymptom Possible Cause Corrective Action Numerics IN-2 IN-3 IN-4

IAD2430 specifications

Cisco Systems IAD2430 is a versatile Integrated Access Device (IAD) designed to deliver voice and data services to small and medium-sized businesses. This device plays a pivotal role in the convergence of voice and data networks, offering a comprehensive solution that simplifies management and enhances operational efficiency.

One of the most compelling features of the IAD2430 is its support for both traditional TDM (Time-Division Multiplexing) and VoIP (Voice over Internet Protocol) technologies. This dual capability enables businesses to migrate to IP-based voice solutions while still maintaining their existing TDM infrastructure. The IAD2430 is equipped with multiple built-in voice ports, allowing it to support a variety of telephony applications.

In terms of performance, the IAD2430 offers robust Quality of Service (QoS) features that prioritize voice traffic to maintain call clarity and reliability. This is particularly critical in environments where voice communication is essential for daily operations. QoS mechanisms ensure that voice packets are transmitted with minimal latency, jitter, and packet loss, providing an uninterrupted communication experience.

The IAD2430 also boasts advanced security features, including firewall protection and encrypted data transmission. This is particularly important for businesses looking to protect sensitive information and ensure compliance with industry regulations. The built-in security measures help safeguard against unauthorized access and potential threats, providing peace of mind to users.

Moreover, the device supports various WAN connections, including T1, DSL, and Ethernet, making it adaptable to different network environments. Its flexible connectivity options allow for seamless integration with existing network infrastructure while maximizing bandwidth utilization.

Management and configuration of the IAD2430 are simplified through a user-friendly web interface and support for remote administration. This allows IT staff to efficiently configure and monitor the device without the need for onsite visits, thus reducing operational costs.

In summary, the Cisco Systems IAD2430 stands out as a reliable and feature-rich IAD capable of catering to the needs of businesses that require integrated voice and data services. Its combination of TDM and VoIP support, enhanced QoS, robust security features, and flexible connectivity options make it an ideal choice for organizations looking to streamline their communication solutions.
Top Page Image Contents