Chapter 1 Overview
Table
Port Mode | Color | Meaning |
|
|
|
STAT | Off | No link. |
|
|
|
| Solid green | Link present. |
|
|
|
| Flashing green | Activity. Port is sending or receiving data. |
|
|
|
| Alternating | Link fault. Error frames can affect connectivity, and errors such as |
| excessive collisions, CRC errors, and alignment and jabber errors are | |
|
| monitored for a |
|
|
|
| Solid amber | Port is not forwarding. Port was disabled by management, an address |
|
| violation, or Spanning Tree Protocol (STP). |
|
| Note After a port is reconfigured, the port LED can remain amber for |
|
| up to 30 seconds while STP checks the switch for possible loops. |
|
|
|
DPLX | Off | Port is operating in half duplex. |
|
|
|
(half or | Green | Port is operating in full duplex. |
full |
|
|
duplex) |
|
|
|
|
|
SPD | 10/100 ports |
|
|
|
|
| Off | Port is operating at 10 Mbps. |
|
|
|
| Green | Port is operating at 100 Mbps. |
|
|
|
| 10/100/1000 ports | |
|
|
|
| Off | Port is operating at 10 Mbps. |
|
|
|
| Green | Port is operating at 100 Mbps. |
|
|
|
| Flashing green | Port is operating at 1000 Mbps. |
|
|
|
| SFP modules |
|
|
|
|
| Off | Port is operating at 10 Mbps. |
|
|
|
| Green | Port is operating at 100 Mbps. |
|
|
|
| Flashing green | Port is operating at 1000 Mbps. |
|
|
|
Catalyst 2940 Switch Hardware Installation Guide
| ||
|