Cisco Systems 2940 appendix Rear-Panel Description, Power Connector

Chapter 1 Overview

Rear-Panel Description

Rear-Panel Description

The rear panel of the switches, as shown in Figure 1-4, have an AC power connector and an RJ-45 console port.

Figure 1-4 Catalyst 2940 Switch Rear Panel

2

1

2

1

AC power connector

RJ-45 console port

89886

Power Connector

You provide power to a switch by using the AC internal power supply. The internal AC power supply is an autoranging unit that supports input voltages between 100 and 240 VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet.

The switch accessory kit includes an L-shaped AC power cord. Table 1-7lists the spare L-shaped AC power cords that you can order from your Cisco sales representative.

Table 1-7 Spare L-Shaped Power Cords

Type	Cisco Part Number
110 V	CAB-AC-RA=
Argentina	CAB-ACR-RA=
Australia, 10 A	CAB-ACA-RA=
China	CAB-ACC-RA=
Europe	CAB-ACE-RA=
Italy	CAB-ACI-RA=
Japan	CAB-JPN-RA=
Switzerland	CAB-ACS-RA=
UK	CAB-ACU-RA=

Catalyst 2940 Switch Hardware Installation Guide

OL-6157-01 1-9