Cisco Systems 2600XM, 2612 quick start Wiring Procedure for Nominal 48 VDC Input, Step Tip

Page 16

Wiring Procedure for Nominal 48 VDC Input

To connect the router to a DC power source, perform this procedure:

Step 1

Warning

Tip

Step 2

Step 3

Warning

Warning

Warning

Caution

Caution

Remove power from the DC circuit. To ensure that power is removed from the DC circuit, locate the circuit breaker for the DC circuit, switch the circuit breaker to the OFF position, and tape the circuit-breaker switch in the OFF position.

Before performing any of the following procedures, ensure that power is removed from the DC circuit. Statement 1003

Secure all power cabling when installing this unit to avoid disturbing field-wiring connections.

Strip the wires to the appropriate length for the terminal block on the power supply.

Connect the DC power input wires to the terminal block, as shown in Figure 12.

When stranded wiring is required, use approved wiring terminations, such as closed-loop or spade-type with upturned lugs. These terminations should be the appropriate size for the wires and should clamp both the insulation and conductor. Statement 1002

The illustration shows the DC power supply terminal block. Wire the DC power supply as illustrated. The proper wiring sequence is ground to ground, positive to positive, and negative to negative. The ground wire should always be connected first and disconnected last. Statement 239

An exposed wire lead from a DC-input power source can conduct harmful levels of electricity. Be sure that no exposed portion of the DC-input power source wire extends from the terminal block plug. Statement 122

The terminal arrangement on your router may not be identical to the arrangement shown in the figures. You must connect the positive, negative, and ground wires according to the labels on the terminals.

Do not overtorque the terminal block captive thumbscrew or terminal block contact screws. The recommended torque is 8.0 ± 0.5 inch-lb (0.9 ± 0.05 N-m).

Figure 12 DC Power Connections for Cisco 2600XM Series and Cisco 2612 Routers (Typical)

On/off

Negative

 

Ground

Positive

 

switch

 

 

 

 

72363

 

 

 

Terminal

 

-

+

block

 

 

Step 4 Secure the wires using cable ties.

Step 5 Turn on power to the DC circuit.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Cisco 2600XM Series and Cisco 2612 Routers Cisco 90-Day Limited Hardware Warranty Terms Duration of Hardware WarrantyReplacement, Repair, or Refund Policy for Hardware To Receive a Return Materials Authorization RMA NumberInstall Chassis Documents, Equipment, and ToolsImportant Safety Instructions OBS! Spara Dessa Anvisningar Guarde Estas Instruções GEM Disse Anvisninger Metal object to the terminals. Statement Installing the Chassis Rack-Mounting the ChassisBracket Installation for Front Mounting in 19-Inch Rack Attaching BracketsBracket Installation for Rear Mounting in 19-Inch Rack Installing Chassis in Rack Attaching Rubber FeetGrounding the Chassis Installing on a DesktopAttaching to Wall Connect Cables System Management ConnectionsVoltages. Statement Port Color Connected To CablePower Connections Connecting Routers to AC PowerConnecting the Router to DC Power DC Wiring RequirementsWiring Procedure for Nominal 48 VDC Input Step TipWAN, LAN, and Voice Connections Connecting Routers to the Cisco Redundant Power SystemPort or Connection Port Type, Color Connected To Cable Power Up the Router Checklist for Power-UpFront Panel Indicators Power-Up ProcedurePerform Initial Configuration Initial Configuration Using the Setup Command Facility Enter a host name for the router this example uses Initial Configuration Using the CLI Manual Configuration Configuration appearsInterface Numbering WAN and LAN Interface NumberingTo access documentation on Cisco.com Where to Go NextVoice Interface Numbering To access documentation using Cisco Connection Online CCO Obtaining DocumentationDocumentation Feedback Cisco.comSubmitting a Service Request Definitions of Service Request SeverityObtaining Technical Assistance Cisco Technical Support WebsiteObtaining Additional Publications and Information USA

2612, 2600XM specifications

The Cisco Systems 2600XM series, notably including the 2612 model, represents a significant evolution in the world of routers, offering medium-sized businesses and branch offices a robust platform for meeting their networking needs. Released as part of the Cisco 2600 series, the 2612 router is renowned for its versatility and performance, striving to address various connectivity and networking challenges.

One of the standout features of the Cisco 2612 is its modular architecture, allowing users to customize the router based on specific requirements. It has two slots for interface cards, enabling the integration of various WAN technologies like T1, E1, ISDN, and more. This flexibility ensures that organizations can adapt their routing capabilities to changing demands without needing a complete hardware overhaul.

The router showcases advanced capabilities for both routing and security. It supports a wide range of routing protocols, including OSPF, EIGRP, and RIP, making it suitable for diverse network environments. Additionally, the Cisco 2612 incorporates security features such as access control lists (ACLs) and encryption options, facilitating secure data transmission and protection against unauthorized access.

Performance is another critical aspect of the Cisco 2612, which is equipped with a powerful CPU and sufficient RAM to handle multiple processes simultaneously. This makes it capable of delivering reliable performance even under heavy workloads. The router can handle both voice and data traffic, supporting voice-over-IP (VoIP) applications and providing a seamless communication experience for users.

In terms of connectivity, the Cisco 2612 supports Ethernet interfaces along with modular WAN connection options, ensuring compatibility with various networking setups. This adaptability makes it an ideal choice for businesses looking to integrate legacy systems with more modern technologies.

Moreover, the Cisco 2600XM series, including the 2612, offers enhanced scalability. As an organization grows, the router can be upgraded with new interface cards or modules to support increased bandwidth or new services, ensuring continued relevance in a rapidly changing technological landscape.

In conclusion, the Cisco 2600XM series 2612 router stands out due to its modularity, robust performance, and security features. It successfully addresses the needs of medium-sized enterprises, making it a go-to solution for businesses aiming to build a reliable and scalable network infrastructure. With its comprehensive array of features, the 2612 continues to play a crucial role in meeting modern connectivity demands.
Top Page Image Contents