Installing the Chassis

Warning

To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024

Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement 1029

Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030

To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the handles on modules (such as power supplies, fans, or cards); these types of handles are not designed to support the weight of the unit. Statement 1032

Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040

You can set the chassis on a desktop or install it in a rack. A chassis of 1 RU height can also be mounted on a wall or other flat surface. See the applicable instructions in the following sections:

•Rack-Mounting the Chassis, page 9

•Wall-Mounting the Chassis—1-Rack-Unit (RU) Chassis Height Only, page 12

•Installing on a Desktop, page 13

Caution To prevent damage to the chassis, never attempt to lift or tilt the chassis by the plastic panel on the front. Always hold the chassis by the metal body.

Rack-Mounting the Chassis

Cisco 2600XM series and Cisco 2612 routers can be installed in 19-, 23-, and 24-inch racks. Use the standard brackets for mounting the chassis in a 19-inch rack; use the optional larger brackets for mounting the chassis in a 23- or 24-inch rack.

You can mount the chassis in the following ways:

•Center mounting—Brackets attached in the center of the chassis with either the front panel or the rear panel facing forward

•Front mounting—Brackets attached at the front of the chassis with the front panel facing forward

•Rear mounting—Brackets attached at the rear of the chassis with the rear panel facing forward

2612, 2600XM specifications

The Cisco Systems 2600XM series, notably including the 2612 model, represents a significant evolution in the world of routers, offering medium-sized businesses and branch offices a robust platform for meeting their networking needs. Released as part of the Cisco 2600 series, the 2612 router is renowned for its versatility and performance, striving to address various connectivity and networking challenges.

One of the standout features of the Cisco 2612 is its modular architecture, allowing users to customize the router based on specific requirements. It has two slots for interface cards, enabling the integration of various WAN technologies like T1, E1, ISDN, and more. This flexibility ensures that organizations can adapt their routing capabilities to changing demands without needing a complete hardware overhaul.

The router showcases advanced capabilities for both routing and security. It supports a wide range of routing protocols, including OSPF, EIGRP, and RIP, making it suitable for diverse network environments. Additionally, the Cisco 2612 incorporates security features such as access control lists (ACLs) and encryption options, facilitating secure data transmission and protection against unauthorized access.

Performance is another critical aspect of the Cisco 2612, which is equipped with a powerful CPU and sufficient RAM to handle multiple processes simultaneously. This makes it capable of delivering reliable performance even under heavy workloads. The router can handle both voice and data traffic, supporting voice-over-IP (VoIP) applications and providing a seamless communication experience for users.

In terms of connectivity, the Cisco 2612 supports Ethernet interfaces along with modular WAN connection options, ensuring compatibility with various networking setups. This adaptability makes it an ideal choice for businesses looking to integrate legacy systems with more modern technologies.

Moreover, the Cisco 2600XM series, including the 2612, offers enhanced scalability. As an organization grows, the router can be upgraded with new interface cards or modules to support increased bandwidth or new services, ensuring continued relevance in a rapidly changing technological landscape.

In conclusion, the Cisco 2600XM series 2612 router stands out due to its modularity, robust performance, and security features. It successfully addresses the needs of medium-sized enterprises, making it a go-to solution for businesses aiming to build a reliable and scalable network infrastructure. With its comprehensive array of features, the 2612 continues to play a crucial role in meeting modern connectivity demands.