Cisco Systems 2700 manual Repositioning Building Highlighted in Blue

Page 14

Deployment and Design Requirements

Figure 12 Repositioning Building Highlighted in Blue

Step 12 WCS is then returned to the campus image with the newly created building highlighted in a green box.Click the green box (see Figure 13).

Figure 13 Newly Created Building Highlighted in Green

	Step 13 To create a building without a campus, choose New Building and click Go.
	Cisco 2700 Series Wireless Location Appliance Deployment Guide
14	OL-8478-01

Image 14

Contents Cisco 2700 Location Appliance Location Tracking Performing a CalibrationHardware Requirements AccuracySoftware Requirements Following Cisco wireless LAN controllers are available Additional Functionality with Location Appliance System Architecture Location-Based Services Overview Designing the Wireless LAN for Location Deployment and Design RequirementsAccess Point Placement Improved Location Accuracy by Increasing Density Creating a Network Design in WCS Designing a Network Creating a New Network DesignClick OK Repositioning Building Highlighted in Blue Applying Calibration Models, Appropriate Orientation Using Antenna Angles Creating and Applying Calibration Models Starting to CalibratePositioning the Crosshairs Configuring the Location Appliance Setting the Location Appliance’s IP Addressing InformationImporting the Location Appliance into WCS Enabling and Configuring Device Tracking Synchronizing ControllersBacking up the Location Appliance Location Appliance MaintenanceEnabling Asset Tag Tracking Restoring the Location Appliance Troubleshooting Tips Q & aClearing the Location Appliance Configuration Upgrading the Location ApplianceTroubleshooting Tips Q & a Frequently Asked Technical Questions Troubleshooting Tips Q & a Troubleshooting Tips Q & a OL-8478-01