Cisco Systems WRK54G manual To start over, I need to set the Router to factory default

Page 52

Wireless-G Broadband Router

11.To start over, I need to set the Router to factory default.

Hold the Reset button for 10 seconds and then release it. This will return the password, forwarding, and other settings on the Router to the factory default settings. In other words, the Router will revert to its original factory configuration.

12.I need to upgrade the firmware.

In order to upgrade the firmware with the latest features, you need to go to the Linksys website and download the latest firmware at www.linksys.com.

Follow these steps:

1.Go to the Linksys website at http://www.linksys.com and download the latest firmware.

2.To upgrade the firmware, follow the steps in “Appendix C: Upgrading Firmware.”

13.The firmware upgrade failed, and/or the Power LED is flashing.

The upgrade could have failed for a number of reasons. Follow these steps to upgrade the firmware and/or make the Power LED stop flashing:

•If the firmware upgrade failed, use the TFTP program (it was downloaded along with the firmware). Open the pdf that was downloaded along with the firmware and TFTP program, and follow the pdf’s instructions.

•Set a static IP address on the PC; refer to “Problem #2, I need to set a static IP address.” Use the following IP address settings for the computer you are using:

IP Address: 192.168.1.50

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.1

•Perform the upgrade using the TFTP program or the Administration tab of the Router’s web-based utility.

14.My DSL service’s PPPoE is always disconnecting.

PPPoE is not actually a dedicated or always-on connection. The DSL ISP can disconnect the service after a period of inactivity, just like a normal phone dial-up connection to the Internet.

•There is a setup option to “keep alive” the connection. This may not always work, so you may need to re- establish connection periodically.

1.To connect to the Router, go to the web browser, and enter http://192.168.1.1 or the IP address of the Router.

2.Enter the password, if asked. (The default password is admin.)

3.On the Setup screen, select the option Keep Alive, and set the Redial Period option at 20 (seconds).

4.Click the Save Settings button.

5.Click the Status tab, and click the Connect button.

6.You may see the login status display as Connecting. Press the F5 key to refresh the screen, until you see the login status display as Connected.

•Click the Save Settings button to continue.

•If the connection is lost again, follow steps 1- 6 to re-establish connection.

Appendix A: Troubleshooting

46

Common Problems and Solutions

Page 51 Page 53
Image 52
Page 51 Page 53
Contents 802 GHz .11g Wireless- G Copyright and Trademarks Word definitionTable of Contents Appendix B Wireless Security Appendix a TroubleshootingAppendix C Upgrading Firmware Appendix D Windows Help List of Figures Router’s Back Panel23 Wireless Tab Wireless Security Radius Introduction WelcomeWhat’s in this User Guide? Wireless-G Broadband Router Planning Your Wireless Network Ad-Hoc versus Infrastructure ModeSsid service set identifier your wireless network’s name Network TopologyPlanning Your Wireless Network Network Layout Getting to Know the Wireless-G Broadband Router Back PanelFront Panel DMZConnecting the Wireless-G Broadband Router OverviewConnecting Your Network Devices Hardware Installation for Connection to Another Router Router Wireless-G Broadband Multiple PCsConnecting the Power Configuring the Wireless-G Broadband Router Password ScreenSetup Tab Basic Setup Internet SetupPPPoE Connection Type L2TP Connection Type Optional Settings Network Address Server Settings Dhcp Setup Tab Ddns 13 Setup Tab Ddns DynDNS accountSetup Tab MAC Address Clone 15 Setup Tab MAC Address CloneSetup Tab Advanced Routing 16 Setup Tab Advanced Routing GatewayWireless Tab Basic Wireless Settings Wireless Tab Wireless Security 19 Wireless Tab Wireless Security WPA Personal22 Wireless Tab Wireless Security WPA2 Enterprise 23 Wireless Tab Wireless Security Radius Wireless Tab Wireless MAC Filter 25 Wireless Tab Wireless MAC FilterWireless Tab Advanced Wireless Settings Synchronize the wireless networkSecurity Tab Firewall Security Tab VPN PassthroughAccess Restrictions Tab Internet Access To create an Internet Access policy33 Port Services Applications and Gaming Tab Port Range Forward 34 Applications and Gaming Tab Port Range ForwardApplications & Gaming Tab Port Triggering Port TriggeringApplications and Gaming Tab DMZ Applications and Gaming Tab QoSAdd a New Application For the application Administration Tab Management Administration Tab LogAdministration Tab Diagnostics 41 Administration Tab DiagnosticsAdministration Tab Firmware Upgrade Administration Tab Factory DefaultsAdministration Tab Config Management Status Tab Router 47 Status Tab RouterStatus Tab Wireless Status Tab Local NetworkCommon Problems and Solutions Appendix a TroubleshootingNeed to set a static IP address on a PC Wireless-G Broadband Router Open a command prompt. For Windows 98SE and Me Application Start and End Protocol IP Address Enabled Can’t get the Internet game, server, or application to work Wireless-G Broadband Router To start over, I need to set the Router to factory default Need to upgrade the firmwareFirmware upgrade failed, and/or the Power LED is flashing My DSL service’s PPPoE is always disconnectingPower LED keeps flashing Frequently Asked Questions What is Network Address Translation and what is it used for? Does the Router support ICQ send file?How can I block corrupted FTP downloads? What is DMZ Hosting? What are the advanced features of the Router?What is the Ieee 802.11g standard? Is the Router cross-platform compatible?What is the Ieee 802.11b standard? What Ieee 802.11g features are supported?What Ieee 802.11b features are supported? What is ad-hoc mode?What is Spread Spectrum? What is ISM band?What is DSSS? What is FHSS? And what are their differences? What is WEP? What is a MAC Address?How do I reset the Router? How do I resolve issues with signal loss?Security Precautions Appendix B Wireless SecuritySecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Broadband Router Figure C-1 Upgrade Firmware Appendix C Upgrading FirmwareAppendix D Windows Help TCP/IPWindows 98SE or Me Instructions Windows 2000 or XP InstructionsFor the Router’s Web-based Utility Figure E-4 MAC Address Filter ListAppendix F Glossary Wireless-G Broadband Router Wireless-G Broadband Router Wireless-G Broadband Router Wireless-G Broadband Router Wireless-G Broadband Router Wireless-G Broadband Router Appendix G Specifications WRK54GOperating Temp Appendix H Warranty Information Limited WarrantyAppendix I Regulatory Information FCC StatementSafety Notices Appendix J Contact Information

WRK54G specifications

The Cisco Systems WRK54G is a versatile wireless router designed to meet the demands of home and small office networking. Renowned for its reliability, it offers a range of features that cater to both casual users and tech-savvy individuals.

At its core, the WRK54G is built on the IEEE 802.11g standard, which supports data transfer rates of up to 54 Mbps. This makes it suitable for various internet-based applications, including browsing, streaming, and online gaming. Additionally, it is backward compatible with the earlier 802.11b standard, ensuring that users with older devices can still enjoy connectivity.

One of the standout features of the WRK54G is its wireless connectivity, which allows users to connect multiple devices without the need for cumbersome cabling. This is especially beneficial in environments where mobility is essential. The router employs robust security protocols, including WEP, WPA, and WPA2, to safeguard the network from unauthorized access and ensure the integrity of data transmission.

In terms of hardware, the WRK54G is equipped with a built-in four-port Ethernet switch, enabling wired connections for devices that require stable and faster internet access, such as desktop computers and gaming consoles. This dual capability of wired and wireless networking makes it a flexible solution for diverse user needs.

Another noteworthy characteristic of the WRK54G is its support for Quality of Service (QoS) functionalities. QoS technology prioritizes bandwidth for specific applications, ensuring that essential services such as VoIP and video streaming receive the necessary resources for optimal performance. This feature is vital for users who rely on uninterrupted internet access for work or entertainment.

Additionally, the router features an intuitive web-based interface that simplifies setup and configuration. Users can easily manage their network settings, create a secure wireless environment, and monitor connected devices without requiring extensive technical knowledge.

In conclusion, the Cisco Systems WRK54G is a reliable and feature-rich wireless router that supports modern networking demands. With its solid performance, robust security measures, dual connectivity options, and user-friendly interface, it remains a practical choice for both home and small business users looking to establish a seamless network experience. Whether for streaming, gaming, or web browsing, the WRK54G provides a solid foundation for a comprehensive wireless networking solution.
Top Page Image Contents