Wireless-G Broadband Router with 2 Phone Ports
PowerThe Power port is where you will connect the power adapter.
The Front Panel
The Router’s LEDs, which inform you about network activities, are located on the front panel.
Figure 3-2: Front Panel
PowerGreen. The Power LED lights up when the Router is powered on. If the LED is flashing, the
Router is booting up, running a system self-test, or upgrading its firmware.
WLANGreen. The WLAN LED lights up when there is an active wireless connection. If the LED is flashing, the Router is sending or receiving data over the wireless network.
Ethernet
Phone
8 | Chapter 3: Getting to Know the Router |
| The Front Panel |