Cisco Systems 15.3.00P1 manual Installing and Uninstalling CWM 15.3.00 P1, CWM Notes and Cautions

Page 33
/usr/users/svplus/scripts/kill_db as superuser (root).

Installing and Uninstalling CWM 15.3.00 P1

CWM Notes and Cautions

Because of the asynchronous behavior of the ILOG client and server interaction, the CWM client requests may be sent before the CWM server is ready. In this case, this error message appears:

Ilb Error: Synchronous request to <unidentified actor failed by timeout>.

Note If the ILOG timeout persists for more than 5 minutes and the CWM is not functioning normally, you should call service.

Parameters that the Network Monitor or Configuration Center displays that do not apply to an element, such as a line or a trunk, often contain the value –1. Consider this the same as Not Applicable.

Network Configurator displays an authentication failure under these circumstances:

•Your password gets changed when you are logged into the CWM with any of these applications open: Configuration Center, Network Monitor, or Chassis View.

•You try to launch the Network Configurator, and the CWM does not prompt you to enter a password. Instead, it displays an authentication failure.

In this case, exit the CWM and launch the Configuration Center again.

Caution If you do not shut down Informix before rebooting, data will be lost. To shut down Informix properly before you reboot the machine, execute

If persistency is enabled in a PNNI network and you remove a node from the network, you must also delete the node and the corresponding trunks and feeders manually from all the gateway nodes. Otherwise, none of these will be cleared from the CWM.

Installing and Uninstalling CWM 15.3.00 P1

This section describes how to install or upgrade CWM 15.3.00 P1. It also provides important background information about installing or upgrading the CWM server. To install or upgrade the server, refer to the CWM 15.3.00 installation guide at this URL. You can access all CWM documentation at this website:

http://www.cisco.com/en/US/products/sw/netmgtsw/ps2340/tsd_products_support_series_home.html

The installation procedure assumes that you have already installed CWM 15.3.00.

See these sections:

•Before You Start, page 34

•Installing Patch 1, page 36

•Uninstalling Patch 1, page 43

 

 

Release Notes for the Cisco WAN Manager, Release 15.3.00 P1

 

 

 

 

 

 

 

OL-11190-01, Rev. C0

 

 

33

 

 

 

 

 

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Release Notes for the Cisco WAN Manager Release 15.3.00 P1 ContentsReleases Supported by CWM 15.3.00, Patch Switch Platform Supported Software ReleaseCWM Server Requirements System RequirementsStandalone Statistics Manager Requirements Java Client RequirementsMin Average Stats Files Intervals Cisco TestingMax. No. Connection Min Segment Swap Min Endpoints No. SpeedBefore You Begin Installing Patches Installing the PatchesSolaris Patch Requirements HP OpenView Requirements Informix RequirementsPatches Solaris Software CWM PackagingJDK ScmsaSupported Hardware New Hardware Supported by CWM 15.3.00, PatchExisting Hardware Supported by CWM 15.3.00, Patch IGX 8400 Series Front Card Back CardBPX 8600 Series MGX 8220 Series MGX 8230 Series MGX 8250 Series MGX 8850 Series MGX-RPM-128M/B MGX-MMF-FE MGX-RJ45-FE MGX-VXSM-6T3 VXSM-BC-SMB-3T3E3PXM1E on MGX 8830, 8830/B, 8850, and 8850/B Series MMF/SMFIR/SMFLR-1-155-SFP MGX-SRME/B MGX-BNC-3T3-M MGX-STM1-EL-1PXM-UI-S3/B PXM1E-COMBO PXM-UI-S3/B MGX-SRMEFront Card Back Cards MGX 8830/B PXM 45/C SeriesMGX 8850 and 8850/B PXM 45 Series MGX-VXSM VXSM-BC-24T1E1PXM45/B PXM-HD PXM-UI-S3 PXM45/C PXM-UI-S3/B MGX-VXSM-155 MGX 8880 PXM45/C SeriesMGX-VXSM-T1E1 VXSM-BC-24T1E1 MGX-VXSM-6T3 VXSM-BC-SMB-3T3E3 MGX 8950 PXM 45 SeriesPXM1 PXM-UI PXM-UI-S3 SES Pnni ControllerReleases Certified for CWM 15.3.00 P1 Card, Shelf, or SwitchNew Features and Enhancements CWM Feature LimitationsFeatures Not Supported Forceload sys/shmsys Forceload sys/semsys Feature LimitationsShmbase 0x0A000000L CWM Feature Limitations CWM Feature Limitations CWM Feature Limitations Configuration Center Limitations SSM IssuesHP OpenView Limitations CWM-to-CWM Communication Limitations Chassis View Operation Network Monitor LimitationsChassis View Operation after Card and Line Switchover Chassis View Card Operation in a Redundant SetupWhen set to false When set to trueCWM Notes and Cautions Installing and Uninstalling CWM 15.3.00 P1Before You Start Installing and Uninstalling CWM 15.3.00 P1 Component File Installing PatchCWM SSCBacking Up the Existing Database Installing the CWM Server PatchRemove the disk1 directory if it exists # dbimport stratacom -d datadbs -i dbexport-location Verifying and Restoring Your Saved DatabaseIf no separate partition exists for datadbs, do these Installing the CWM SNMPAgent ServiceAgent PatchInstalling the SSM Patch Installing the SSC PatchInstalling the RTM Proxy Patch Creating a CWM Auto-Restart Shell Script Uninstalling PatchInstalling Wandest 2.7.00, Patch Installing Wandest 2.7.00, PatchInstalling the Wandest Client Patch Installing the Wandest Server PatchSnmp Service Agent Trap Limitation Caveats Issues Resolved in the CWM 15.3.00, Patch 1 SoftwareBug ID Description Details and Workaround Bug ID HeadlineRelated Documentation Obtaining Documentation, Support, and Security Guidelines OL-11190-01, Rev. C0

15.3.00P1 specifications

Cisco Systems 15.3.00P1 is a pivotal release in the evolution of Cisco's IOS (Internetwork Operating System). This version introduces a range of features and enhancements aimed at improving network reliability, security, and performance. Built to support various networking scenarios, 15.3.00P1 serves as a robust platform for enterprises and service providers alike.

One of the standout features of 15.3.00P1 is its enhanced support for IPv6, which is increasingly vital as the internet continues to evolve. This version includes improved routing protocols and mechanisms that allow seamless integration and transition between IPv4 and IPv6. This dual-stack support ensures that network operators can manage their resources efficiently while preparing for the future.

Quality of Service (QoS) enhancements in Cisco IOS 15.3.00P1 help prioritize critical traffic flows, enabling organizations to allocate bandwidth according to application needs. This is particularly beneficial in environments where latency-sensitive applications, such as VoIP and video conferencing, are prevalent. The precise control over traffic helps reduce congestion and ensures a smooth user experience.

Security features have been significantly bolstered in this release. It includes advanced threat detection capabilities and improved access control lists (ACLs), allowing for more granular security policies. The enhanced security framework helps protect network devices from a variety of threats, ensuring that data integrity and confidentiality are maintained.

Another critical improvement in this version is its enhanced multicast routing capabilities. This is particularly essential for organizations utilizing video or other bandwidth-intensive applications that require efficient data delivery to multiple endpoints. The use of protocols such as Protocol Independent Multicast (PIM) facilitates efficient routing and reduces bandwidth consumption.

Cisco 15.3.00P1 also features better support for various hardware platforms, ensuring compatibility and optimal performance across Cisco routers and switches. The architecture enhancements allow for improved system resource management, reducing operational overhead while maximizing performance.

In addition to these features, the release incorporates several bug fixes and performance optimizations, addressing issues in previous versions. This attention to detail not only enhances system stability but also contributes to a more streamlined user experience.

Overall, Cisco Systems 15.3.00P1 represents a significant step forward in network operating systems, with its array of security, performance, and management enhancements making it an ideal choice for modern networking environments. Organizations deploying this version can expect improved operational efficiency and a more secure networking experience.
Top Page Image Contents