Cisco Systems 15.3.00P1 manual Solaris Patch Requirements, Before You Begin Installing Patches

Page 6

System Requirements

Solaris Patch Requirements

This section shows the Solaris patches that you must install for the CWM and those that we recommend you install. You will install these patches after you install the Solaris 9 operating system.

Before You Begin Installing Patches

For best results, follow these Sun recommendations before you begin installing the patches:

After installing the Solaris 9 operating system, you must install the Solaris 9 Kernel Patch 12 or later. After you have installed the patch, you will install the additional patches (see Table 6) if they were not already installed as part of the cluster.

Use the single-user mode to install most patches.

Shut down CWM processes before installing the patches.

Avoid installing these patches that cause problems with Informix during startup.

SPARC Platform—Solaris 9 with patches 112963-21 through 112963-24

x86 Platform—Solaris 9 with patches 113986-17 through 113986-20

Not all Solaris patches or patch clusters require a reboot. If a reboot is not required, you can start the CWM after the patch is installed.

Installing the Patches

Use this procedure and sequence to install the Solaris patches, which assumes that the Solaris operating system is already installed.

Step 1 Verify the already installed patches. To do this, use the Solaris showrev –pcommand.

Step 2 Go to the SunSolve Patch Access website to access the patches:

http://sunsolve.Sun.COM/pub-cgi/show.pl?target=patches/patch-access

(If you have a SunSpectrum contract, you can also access patches from SunService.)

Install the Kernel Patch 12 for Solaris 9. See Table 6 for the correct version number.

Step 3 Install the rest of the required patches if they were not already installed as part of the cluster. Depending on your situation, you may want to enter only the first 6 digits of the patch number in the Find Patch field on the Sun Patch Access site and not the version extension to obtain the latest patch version.

Step 4 Install the recommended patches, as needed and desired. (Several of these recommended patches may require a service contract with Sun.)

 

Release Notes for the Cisco WAN Manager, Release 15.3.00 P1

6

OL-11190-01, Rev. C0

Image 6
Contents Contents Release Notes for the Cisco WAN Manager Release 15.3.00 P1Switch Platform Supported Software Release Releases Supported by CWM 15.3.00, PatchSystem Requirements CWM Server RequirementsJava Client Requirements Standalone Statistics Manager RequirementsMax. No. Connection Min Segment Intervals Cisco TestingMin Average Stats Files Swap Min Endpoints No. SpeedBefore You Begin Installing Patches Installing the PatchesSolaris Patch Requirements HP OpenView Requirements Informix RequirementsPatches Solaris JDK CWM PackagingSoftware ScmsaSupported Hardware New Hardware Supported by CWM 15.3.00, PatchExisting Hardware Supported by CWM 15.3.00, Patch IGX 8400 Series Front Card Back CardBPX 8600 Series MGX 8220 Series MGX 8230 Series MGX 8250 Series MGX 8850 Series MGX-RPM-128M/B MGX-MMF-FE MGX-RJ45-FE MGX-VXSM-6T3 VXSM-BC-SMB-3T3E3PXM1E on MGX 8830, 8830/B, 8850, and 8850/B Series PXM-UI-S3/B MGX-SRME/B MGX-BNC-3T3-M MGX-STM1-EL-1MMF/SMFIR/SMFLR-1-155-SFP PXM1E-COMBO PXM-UI-S3/B MGX-SRMEMGX 8830/B PXM 45/C Series Front Card Back CardsMGX 8850 and 8850/B PXM 45 Series MGX-VXSM VXSM-BC-24T1E1PXM45/B PXM-HD PXM-UI-S3 PXM45/C PXM-UI-S3/B MGX-VXSM-T1E1 VXSM-BC-24T1E1 MGX-VXSM-6T3 VXSM-BC-SMB-3T3E3 MGX 8880 PXM45/C SeriesMGX-VXSM-155 MGX 8950 PXM 45 SeriesSES Pnni Controller PXM1 PXM-UI PXM-UI-S3Card, Shelf, or Switch Releases Certified for CWM 15.3.00 P1New Features and Enhancements CWM Feature LimitationsFeatures Not Supported Feature Limitations Forceload sys/shmsys Forceload sys/semsysShmbase 0x0A000000L CWM Feature Limitations CWM Feature Limitations CWM Feature Limitations Configuration Center Limitations SSM IssuesHP OpenView Limitations CWM-to-CWM Communication Limitations Network Monitor Limitations Chassis View OperationWhen set to false Chassis View Card Operation in a Redundant SetupChassis View Operation after Card and Line Switchover When set to trueInstalling and Uninstalling CWM 15.3.00 P1 CWM Notes and CautionsBefore You Start Installing and Uninstalling CWM 15.3.00 P1 CWM Installing PatchComponent File SSCInstalling the CWM Server Patch Backing Up the Existing DatabaseRemove the disk1 directory if it exists Verifying and Restoring Your Saved Database # dbimport stratacom -d datadbs -i dbexport-locationInstalling the CWM SNMPAgent ServiceAgent Patch If no separate partition exists for datadbs, do theseInstalling the SSC Patch Installing the SSM PatchInstalling the RTM Proxy Patch Uninstalling Patch Creating a CWM Auto-Restart Shell ScriptInstalling Wandest 2.7.00, Patch Installing Wandest 2.7.00, PatchInstalling the Wandest Server Patch Installing the Wandest Client PatchSnmp Service Agent Trap Limitation Bug ID Description Details and Workaround Issues Resolved in the CWM 15.3.00, Patch 1 SoftwareCaveats Bug ID HeadlineRelated Documentation Obtaining Documentation, Support, and Security Guidelines OL-11190-01, Rev. C0

15.3.00P1 specifications

Cisco Systems 15.3.00P1 is a pivotal release in the evolution of Cisco's IOS (Internetwork Operating System). This version introduces a range of features and enhancements aimed at improving network reliability, security, and performance. Built to support various networking scenarios, 15.3.00P1 serves as a robust platform for enterprises and service providers alike.

One of the standout features of 15.3.00P1 is its enhanced support for IPv6, which is increasingly vital as the internet continues to evolve. This version includes improved routing protocols and mechanisms that allow seamless integration and transition between IPv4 and IPv6. This dual-stack support ensures that network operators can manage their resources efficiently while preparing for the future.

Quality of Service (QoS) enhancements in Cisco IOS 15.3.00P1 help prioritize critical traffic flows, enabling organizations to allocate bandwidth according to application needs. This is particularly beneficial in environments where latency-sensitive applications, such as VoIP and video conferencing, are prevalent. The precise control over traffic helps reduce congestion and ensures a smooth user experience.

Security features have been significantly bolstered in this release. It includes advanced threat detection capabilities and improved access control lists (ACLs), allowing for more granular security policies. The enhanced security framework helps protect network devices from a variety of threats, ensuring that data integrity and confidentiality are maintained.

Another critical improvement in this version is its enhanced multicast routing capabilities. This is particularly essential for organizations utilizing video or other bandwidth-intensive applications that require efficient data delivery to multiple endpoints. The use of protocols such as Protocol Independent Multicast (PIM) facilitates efficient routing and reduces bandwidth consumption.

Cisco 15.3.00P1 also features better support for various hardware platforms, ensuring compatibility and optimal performance across Cisco routers and switches. The architecture enhancements allow for improved system resource management, reducing operational overhead while maximizing performance.

In addition to these features, the release incorporates several bug fixes and performance optimizations, addressing issues in previous versions. This attention to detail not only enhances system stability but also contributes to a more streamlined user experience.

Overall, Cisco Systems 15.3.00P1 represents a significant step forward in network operating systems, with its array of security, performance, and management enhancements making it an ideal choice for modern networking environments. Organizations deploying this version can expect improved operational efficiency and a more secure networking experience.