Cisco Systems 1400 manual Safety Information, FCC Safety Compliance Statement, Safety Precautions

Page 29

Chapter 2 Installation Overview

Safety Information

Warning This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security.

Safety Information

Follow the guidelines in this section to ensure proper operation and safe use of the bridge.

FCC Safety Compliance Statement

The FCC, with its action in ET Docket 96-8, has adopted a safety standard for human exposure to RF electromagnetic energy emitted by FCC-certified equipment. When used with approved Cisco Aironet antennas, Cisco Aironet products meet the uncontrolled environmental limits found in OET-65 and ANSI C95.1, 1991. Proper operation of this radio device according to the instructions in this publication results in user exposure substantially below the FCC recommended limits.

Safety Precautions

Warning Do not locate the antenna near overhead power lines or other electric light or power circuits, or where it can come into contact with such circuits. When installing the antenna, take extreme care not to come into contact with such circuits, as they may cause serious injury or death. For proper installation and grounding of the antenna, please refer to national and local codes (e.g. U.S.:NFPA 70, National Electrical Code, Article 810, in Canada: Canadian Electrical Code, Section 54).

Each year hundreds of people are killed or injured when attempting to install an antenna. In many of these cases, the victim was aware of the danger of electrocution, but did not take adequate steps to avoid the hazard.

For your safety, and to help you achieve a good installation, please read and follow these safety precautions. They may save your life!

1.If you are installing an antenna for the first time, for your own safety as well as others, seek professional assistance.

2.Select your installation site with safety, as well as performance in mind. Remember: electric power lines and phone lines look alike. For your safety, assume that any overhead line can kill you.

3.Call your electric power company. Tell them your plans and ask them to come look at your proposed installation. This is a small inconvenience considering your life is at stake.

4.Plan your installation carefully and completely before you begin. Successful raising of a mast or tower is largely a matter of coordination. Each person should be assigned to a specific task, and should know what to do and when to do it. One person should be in charge of the operation to issue instructions and watch for signs of trouble.

5.When installing your antenna, remember:

a.Do not use a metal ladder.

b.Do not work on a wet or windy day.

Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide. OL-4072-03

 

OL-4072-04

2-3

 

 

 

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Text Part Number OL-4072-04 Corporate HeadquartersCisco Systems, Inc. All rights reserved Iii N T E N T SStacking Bridges Using Ipsu to Set the Bridge’s IP Address and Ssid Overview D-2 Objectives PrefaceAudience OrganizationViii ConventionsRelated Publications Product Documentation DVD Obtaining DocumentationCisco.com Documentation Feedback Reporting Security Problems in Cisco ProductsCisco Product Security Overview Ordering DocumentationObtaining Technical Assistance Product Alerts and Field NoticesCisco Technical Support & Documentation Website XiiXiii Submitting a Service RequestXiv Definitions of Service Request SeverityObtaining Additional Publications and Information Preface Obtaining Additional Publications and Information Xvi Overview Bridge Configurations Key FeaturesExternal Antenna PowerMetal Enclosure Integrated AntennaEthernet Ports Bridge LEDs Bridge Connectors and LEDsPoint-to-Point Configuration Network Configuration ExamplesReceive Signal Strength Indicator Port Point-to-Multipoint Configuration Port Aggregation or Redundancy ConfigurationCategory Bridge Power Injector and Power Module Bridge SpecificationsCofdm Maximum Power Levels Installation Overview 120 VAC, 15A U.S VAC, 10A International Safety Precautions Safety InformationFCC Safety Compliance Statement Cables Ground See note Typical Bridge Installation ComponentsUnpacking the Bridge Installation GuidelinesSite Surveys Package Contents Before Beginning the InstallationBridge Layout and Connectors VDC power output cable AC power cord Power module Installation Summary Installation Overview Installation Summary Mounting and Alignment Overview Multi-function Mount Mounting the BridgeMounting Hardware Mast Type Mast Diameter Mast Attachment Method Bridge LEDsLED and Connector Locations Install LED State Bridge StateSignal Level dBm Ethernet LED Status LED Radio LED Aligning the Antenna Using LED IndicationsRssi Reading volts Aligning the Antenna Using the Rssi VoltageStacking Bridges Choosing a Second Mounting Location Installing the Stacked BridgesOverview Verifying Isolation Stacking Bridges Verifying Isolation Configuring the Bridge for the First Time Before You Start Resetting the Bridge to Default SettingsObtaining and Assigning an IP Address Connecting to the Bridge LocallyAssigning Basic Settings Summary Status OL-4072-04 Page Output Power Level Default Settings on the Express SetupSetting Default What To Do NextObtaining and Installing Ipsu Using the IP Setup UtilityProtecting Your Wireless LAN Click Get IP Address Using Ipsu to Find the Bridge’s IP AddressIpsu Set Parameters Screen Using Ipsu to Set the Bridge’s IP Address and SsidCommand Purpose Assigning an IP Address Using the CLIUsing a Telnet Session to Access the CLI Troubleshooting Ethernet Status Radio Meaning Bridge Normal Mode LED IndicationsChecking the Bridge LEDs LED Digit Description Power Injector LEDsBlinking Codes First Second Injector Status Power Injector LEDsChecking Power Security Settings Checking Basic Configuration SettingsAntenna Alignment Resetting to the Default ConfigurationUsing the Mode Button Reloading the Bridge Image Using the Web Browser InterfaceBrowser Http Interface Web Browser InterfaceBrowser Tftp Interface Obtaining the Bridge Image FileHttp//tftpd32.jounin.net Obtaining the Tftp Server SoftwareTranslated Safety Warnings Appendix a Translated Safety Warnings Installation Warning Installation and Grounding Warning Page Circuit Breaker Warning Ground Conductor Warning OL-4072-04 Installation Warning Lightning Activity Warning Radio Frequency Exposure Limits Explosive Device Proximity WarningEen dergelijk gebruik te voldoen Und bestimmtRestricted Area Warning Page OL-4072-04 Declarations of Conformity and Regulatory Information For Home or Office USE International Models Industry CanadaCanadian Compliance Statement Cisco Part Number Model GainEuropean Community Ireland Declaration of Conformity for RF Exposure Chinese Translation English Translation Administrative Rules for Cisco Aironet Bridges in TaiwanBridge Model Operation of Cisco Aironet Bridges in BrazilPortuguese Translation Channels and Maximum Power Levels OL-4072-04 Assembling the Rooftop or Wall Mount Unpacking the Mount Package ContentsRepeat Steps 8 and 9 for the other square hole Assembling the MountOL-4072-04 GL-1 O S S a R YGL-2 Ofdm GL-3GL-4 GL-5 Computing device with an installed client adapterGL-6 IN-1 D EIN-2

1400 specifications

Cisco Systems 1400, known for its robust networking solutions, is a versatile and powerful device designed to enhance connectivity in various environments. The Cisco 1400 is part of the Cisco Industrial Router series and is tailored specifically for industrial applications, particularly in challenging environments where durability and reliability are paramount.

One of the main features of the Cisco 1400 is its rugged construction. It is built to withstand extreme temperatures, vibrations, and dust, making it ideal for deployment in factories, oil and gas rigs, and outdoor installations. This ruggedness ensures operational continuity in situations where standard networking equipment might fail.

Connectivity is another primary characteristic of the Cisco 1400. It supports a variety of WAN and LAN interfaces, including Serial, Ethernet, and cellular connections. This multifunctionality allows for flexible network design, enabling organizations to integrate the device into existing infrastructure seamlessly. Furthermore, it facilitates remote access, making it suitable for managing distributed networks in real-time.

The Cisco 1400 integrates advanced security features to safeguard data and network integrity. With support for VPN, firewall, and intrusion prevention systems, it provides a secure platform for critical communications. The device is also compliant with various industry standards and regulatory requirements, ensuring that organizations can maintain robust security postures in line with compliance mandates.

Another notable technology featured in the Cisco 1400 is its support for Cisco’s IoT capabilities. It can connect and manage numerous IoT devices, providing enhanced monitoring and data collection critical for industrial applications. This feature supports the concept of Industry 4.0, allowing businesses to leverage data analytics for predictive maintenance and operational efficiency.

Management and configuration of the Cisco 1400 are simplified through the use of Cisco Prime Infrastructure and Cisco DNA Center. These management tools provide intuitive dashboards and automated processes, streamlining network operations.

In summary, the Cisco Systems 1400 is a powerful, rugged networking solution designed for industrial applications. With its versatile connectivity options, robust security features, support for IoT technologies, and simplified management capabilities, it stands out as an exceptional choice for organizations looking to enhance their network infrastructure in challenging environments. This makes the Cisco 1400 an ideal solution for modern industrial connectivity needs.
Top Page Image Contents